Set Button - Compex SAS2224 Quick Install Manual

8.1.2. Set Button

This button enables you to:
♦ Select a port to set/reset a option mode.
♦ Save and update changes.
To activate this function,
1. After Mode button is set to the desired option, the port LED will start to flash
2. To select a port, press Set button once to select it when the desired port LED
3. To set and save the mode, press the Set button and hold it down for about 3
10
follow the sequence port #1 to port #24.
is flashing.
seconds until all port LEDs flashed thrice.
24-port 10/100Mbps Fast Ethernet Switch
with Power Buttons
SAS2224
English