Compex SAS2224 Quick Install Manual page 11

LEDs Description
Two function groups, namely Display LED group and Configuration LED
group, can be selected from the Mode button:
Display LED: To select general port operation status
Link/Act
10/100M
Full/Col
Configuration LED: To configure the ports and set Priority/VLAN operation
Priority
VLAN1/3
VLAN2/4
100M
Half
English
Function
Display all active ports link and activity status.
Display all active ports speed. ON for 100Mbps, OFF for
10Mbps.
Display all active ports Duplex mode and collision status.
ON
OFF
Blinks
Function
Set priority of the ports
Set/reset/view pre-set VLAN1/3
Set/reset/view pre-set VLAN2/4
Set/reset/view pre-set speed for all ports.
Set/reset/view pre-set duplex mode for all ports.
24-port 10/100Mbps Fast Ethernet Switch
For Full-Duplex mode
For Half-Duplex mode.
Indicate collision is active. This occurs only when
port is operating in Half-Duplex mode.
with Power Buttons
SAS2224
Description
Description
9