[Cam] Tab - Panasonic WJ-ND400K/G Operating Instructions Manual

[CAM] tab

When displaying live images from a camera with the panning/tilting function, it is possible to operate the camera
(pan/tilt, zoom, focus, brightness, preset position and auto function). It may be impossible to operate the camera or
some functions may be inoperable depending on the model of the camera.
q [Zoom] box
Zooming can be adjusted by clicking the [-] button or
the [+] button. Click the [x1] button to reset zoom.
w [Focus] box
Focusing can be adjusted by clicking the [Near] but-
ton or the [Far] button.
The auto focus function can be performed by click-
ing the [Auto] button.
e [Auto mode] box
Activate the designated auto function of the camera.
Select the auto mode function (auto track, auto pan,
preset sequence, sort, or patrol) of the camera by
clicking the [V] button, and then click the [Start] but-
ton. Click the [Stop] button to stop the auto mode
function.
r Control pad/buttons
Clicking the buttons around the control pad can
move (pan/ tilt) a camera in the clicked direction.
Clicking inside the control pad also can adjust the
vertical/horizontal position (pan/tilt) of the displayed
image. Panning/ tilting speed will be faster if a
clicked point gets farther from the center point of the
control pad.
q e
w
r t
y
t [Brightness] box
The brightness can be adjusted by clicking the [-]
(darker) button or the [+] (brighter) button.
It is possible to reset the set brightness by clicking
the [Reset] button.
y [Preset] box
[Go] button
Move the camera to the preset position registered in
advance. Select a preset position number (Home, 1
- 256) by clicking the [V] button, and then click the
[Go] button.
It is necessary to register preset positions in
advance to move the camera to the preset positions.
[Set] button
Register the camera position as a preset position by
designating the desired preset position number.
Select a preset position number (1 - 256) by clicking
the [V] button after moving the camera to a position
to be registered as a preset position, and then click
the [Set] button. (It is impossible to register the posi-
tion as "Home".)
17