Phylink Bullet Pro PLC-336PW Quick Install Manual page 14

2.6 Reset the camera back to factory settings
If you forget your admin password or have any other reason to reset the camera
to its factory settings, please use the following procedure:
1. Make sure the camera is powered on.
2. It is easier to use the software reset function in the "Backup or Reset" menu.
If hardware reset is needed, unscrew the entire front part of the camera.
It is easiest to do it if you take the sun shield off first.
3. Press and hold the Reset Button for one second or more, then release it.
You'll see the Status indicator LED go off for a few seconds. This indicates that
reset is in progress.
A few seconds later the camera will restart and is now at factory settings.
Of course, after reset the user name and password will both be "admin" again
(Without quotes).
12
Reset Button
Status Indicator LED