Installation; Before You Install - AT&T 9341 User Manual

9341_book_1ATT 6/14/00

INSTALLATION

Before You Install

1 Choose a location for the base near an electrical outlet and a
telephone jack.
This phone requires a modular telephone jack and a standard electrical
outlet (110v AC) not controlled by a wall switch.
2 Install the handset battery.
4
4:07 PM Page 4
a) Remove battery
compartment
cover by pressing
on the
indentation
and sliding
downward.
c) Place battery pack
in compartment
with the wires in
the lower left
corner, along the
bottom of the
battery pack.
d) Replace
cover by
sliding it up
into place.
b) Align two holes in
plug with socket
pins, and snap the
plug into place.