Page 1
10/17/00 USER’S MANUAL Part 2 900 MHz Cordless Telephone 9210 Fold open this manual for information about this telephone’s installation and operation. Please also read Part 1 — Important Product Information. AT&T and the globe symbol are registered trademarks of AT&T Corp. licensed to Advanced American Telephones.
I N S T A L L A T I O N Before You Install Choose a location for the base near an electrical outlet and a telephone jack. Install the handset battery. a) Remove battery compartment cover by pressing on the indentation and sliding downward.
I N S T A L L A T I O N Wall Installation Standard electrical outlet Connect the power cord. Place power cord as shown, so it hangs straight down between base and wall. Use only the power cord supplied with this product. If you need a replacement, call 1 800 222-3111.
T E L E P H O N E O P E R A T I O N Handset Volume Adjust volume of what you hear through the handset. Make or Answer a Call Lift handset from base — OR — Press P.
T E L E P H O N E O P E R A T I O N Indicates handset is Indicates handset is in use charging in base Page/ Handset Locator Press once to page the handset for up to one minute —...
T E L E P H O N E M E M O R Y This cordless phone can store 10 telephone numbers, each up to 16 digits long. You can dial numbers stored in memory just by pressing M and a number button. Store Memory Numbers 1 Make sure the handset is off.
Charging the Handset Battery Pack This battery should remain charged up to six days with the ringer turned on and up to 12 days with the ringer off. A fully charged battery provides an average talk time of about six hours. The battery pack needs charging when: •...
I N C A S E O F D I F F I C U L T Y If you have difficulty operating this phone, try the suggestions below. For Customer Service, visit our website at www.telephones.att.com or call 1 800 222–3111. Please retain your receipt as your proof of purchase.
Need help?
Do you have a question about the 9210 and is the answer not in the manual?
Questions and answers