Table of Contents
Advertisement
Quick Links
O P E R A T I N G R A N G E
This cordless telephone operates within the maximum
power allowed by the Federal Communications Commission
(FCC). Even so, this handset and base can communicate
over only a certain distance — which can vary with the
locations of the base and handset, the weather, and the
construction of your home or office. For best performance,
keep the base antenna fully upright.
If you receive a call while you are out of range, the
handset might not ring — or if it does ring, the call might
not connect when you press P. Move closer to the
base, then press P to answer the call.
900 MHz
Cordless Telephone 9320/8220
Fold open this manual for information about this
telephone's installation and operation. Please
also read Part 1 — Important Product Information.
REVISED
5/17/01
AT&T and the globe symbol are registered trademarks of AT&T Corp. licensed to Advanced American Telephones.
© 2001 Advanced American Telephones. All rights reserved.
Printed in China.
If you move out of range during a phone
conversation, you might hear noise or interference. To
improve reception, move closer to the base.
If you move out of range without pressing O, your
phone will be left "off the hook." To hang up properly, walk
back into range, periodically pressing O.
Issue 1AT&T 05/01
USER'S MANUAL
Part 2
Advertisement
Table of Contents
Related Manuals for AT&T 9320/8220
Summary of Contents for AT&T 9320/8220
- Page 1 P. Move closer to the base, then press P to answer the call. 900 MHz Cordless Telephone 9320/8220 Fold open this manual for information about this telephone’s installation and operation. Please also read Part 1 — Important Product Information.
-
Page 2: Installation
I N S T A L L A T I O N Before You Install Choose a location for the base near an electrical outlet and a telephone jack. Install the handset battery. a) Remove battery compartment cover by pressing on the indentation and sliding downward. -
Page 3: Wall Installation
I N S T A L L A T I O N Wall Installation Standard electrical outlet Connect the telephone line cord. Connect the power cord. Use only the power cord supplied with this product. If you need a replacement, call 1 800 222–3111. Mount the base on the wall. -
Page 4: Belt Clip Installation
I N S T A L L A T I O N Belt Clip Installation Attach the belt clip to the cordless handset (optional). To attach Charging the Handset Battery Pack This battery should remain charged up to six days with the ringer turned on and up to 12 days with the ringer off. -
Page 5: Telephone Operation
T E L E P H O N E O P E R A T I O N Answer a Call Lift handset from base — OR — Press any key. Make a Call Press and wait for light to go on steadily. -
Page 6: Page/Handset Locator
T E L E P H O N E O P E R A T I O N Indicates handset is charging in base Page/Handset Locator Indicates handset Press once to page the is in use handset for up to one minute —... -
Page 7: Telephone Memory
T E L E P H O N E M E M O R Y This cordless phone can store 10 telephone numbers, each up to 16 digits long. You can dial numbers stored in memory just by pressing P, M and a number button. Store Memory Numbers 1 Make sure the handset is off. -
Page 8: In Case Of Difficulty
I N C A S E O F D I F F I C U L T Y If you have difficulty operating this phone, try the suggestions below. For Customer Service, visit our website at www.telephones.att.com or call 1 800 222–3111. Please retain your receipt as your proof of purchase.
Need help?
Do you have a question about the 9320/8220 and is the answer not in the manual?
Questions and answers