AT&T 9105 User Manual
  1. Manuals
  2. Brands
  3. AT&T Manuals
  4. Cordless Telephone
  5. 9105
  6. User manual
AT&T 9105 User Manual

AT&T 9105 User Manual

At&t cordless telephone user's manual 9105
Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Table of Contents

User's Manual
for Cordless Telephone 9105
Fold open this manual for information about
this telephone's installation and operation.
Please read Part 1 — Important Product
Information, included in this package.
Changes channel.
Handset
Volume Control
PHONE indicator
goes on while you
are on a call.
Makes a call and
accesses special
subscriber calling
services requiring a
switchhook Flash.
Temporary Tone
Programs a number
in memory or
changes ringer type.
Part 2
© 1998 Philips Consumer Communications, L.P. All rights reserved.
Printed in Mexico. 848233458 Issue 1AT&T
I N S TA L L AT I O N
Belt Clip—
Slide over the
back of the handset
until it snaps
firmly in place.
1
LOW BATT indicator
goes on when battery
needs to be charged.
Ends a call.
Accesses memory
dialing numbers.
Redials last
call made.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 9105 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for AT&T 9105

Summary of Contents for AT&T 9105

  • Page 1 User’s Manual for Cordless Telephone 9105 Fold open this manual for information about this telephone’s installation and operation. Please read Part 1 — Important Product Information, included in this package. Changes channel. Handset Volume Control PHONE indicator goes on while you are on a call.

  • Page 2: Installation

    CAUTION: Use only the AC power adapter supplied with this telephone . This is a Class 2 AC adapter, specifi- cally designed for use with the 9105. NOTE: Connect power to the base unit before placing the handset in the cradle.
  • Page 3 6 Charge the handset batteries before use. Place the handset face down in the base unit cradle. Make sure that the IN USE/CHARGE light on the base is on. The handset battery must be charged for 16 hours before using your phone for the first time.

  • Page 4: Telephone Operation

    I M P O RTA N T: Wh e n ever the handset b at t e ries are re m ove d, the handset must be placed in the base unit cra d l e for re i n i t i a l i z ation. The IN USE/ CHARGE indicator on the base unit will flash during the initializat i o n .

  • Page 5: Spare Battery

    Memory Features This telephone can store 10 telep h o n e nu m b e rs , e a ch up to 16 digits long. Numbers will remain stored in memory unless you erase or change them by entering other numbers. Programming a Number into Memory Make sure the handset is...
  • Page 6 Charging Contacts SPARE BATTERY indicator Spare Battery Charger The Cordless Telephone 9105 is equipped with a spare battery charger built-in to the base unit. The spare battery charger allows you to always have a charged battery available, should your handset battery discharge during normal use.

  • Page 7: In Case Of Difficulty

    If you have difficulty operating this phone, try the suggestions below. If you still have trouble, call 1 800 722-9125. If the phone does not work at all, check these items first: • Make sure the power cord is plugged into an outlet not controlled by a wall switch.
  • Page 8 • The layout of your home or office may be limiting the operating range. Try moving the base to another location—preferably on an upper floor. If you lose a call after changing channels: You were probably almost out of range. Move closer to the base before changing channels.

Table of Contents