Replacing A Stored Number; Storing A Pause In A Memory Number; Storing A Number And Name From Call History In Telephone Memory; Viewing Numbers In Memory - AT&T 9340 User Manual

Replacing a Stored Number

You can replace a stored number by storing a new number in its place.
Follow the directions for "Storing Numbers in Memory."

Storing a Pause in a Memory Number

While storing a memory number (see "Storing Numbers in Memory") use the
softkey to select PAUSE where you want dialing to pause for two seconds.
Storing a Number and Name from call history in
Telephone Memory
You can store information received from Caller ID in the telephone memory.
(See CALLER ID OPERATION.)
1
Use < or
2 Press U.
3 Use the softkey to select STORE.
4 Enter a memory location from 0–9.

Viewing Numbers in Memory

1
Press U.
2
Use the softkey to select DIR.
3
Select VIEW.
4 <
Press or
— OR —
Enter the memory location from 0–9.
5 Press U to exit.
NOTE: When viewing numbers in memory, you can press
dial the number displayed on the screen.

Deleting/Editing Memory Numbers

1 Follow Steps 1 through 4 in "Viewing Numbers in Memory."
2
To delete a number, use the softkey to select DELETE. The screen
prompts DELETE LOC.? Use the softkey to select YES.
3
The screen displays DELETED.
AT&T 9340 book_1ATT
TELEPHONE MEMORY
> to scroll to the number you want to store.
>
to scroll through memory
15
D
to
15
11/3/98, 12:40 PM