Onboard Fdc Controller - DFI NS80-EA User Manual

3.1.4.3 Onboard Super IO Device
Move the cursor to this field and press <Enter>. The following
screen will appear.

Onboard FDC Controller

Onboard Serial Port 1
Onboard Serial Port 2
UART2 Mode Select
X RxD, TxD Active
X IR Transmission Delay
Onboard Parallel Port
Parallel Port Mode
EPP Mode Select
X ECP Mode Use DMA
Game Port Address
MIDI Port Address
X MIDI Port IRQ
↑↓→← Move
The settings on the screen are for reference only. Your version may not be
identical to this one.
Onboard FDC Controller
Enabled
Disabled
Onboard Serial Port 1 and Onboard Serial Port 2
Auto
3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3
Disabled
Phoenix - AwardBIOS CMOS Setup Utility
Onboard Super IO Device
Enabled
Disabled
Disabled
Normal
Hi, Lo
Enabled
378/IRQ7
SPP
EPP 1.7
3
201
330
10
Enter:Select +/-/PU/PD:Value F10:Save
F5:Previous Values F6:Fail-Safe Defaults
Enables the onboard floppy disk controller.
Disables the onboard floppy disk controller.
The system will automatically select an I/O address
for the onboard serial por t 1 and serial por t 2.
manually select an I/O address for the onboard
serial port 1 and serial port 2.
Disables the onboard serial por t 1 and/or serial
port 2.
Award BIOS Setup Utility
Item Help
Menu Level
ESC:Exit F1:General Help
F7:Optimized Defaults
Allows
3
you to
67