INSTALLATION
Before You Install
1
Choose a location for the base near an electrical outlet and a
telephone jack.
This phone requires a modular telephone jack and a standard electrical
outlet (110v AC) not controlled by a wall switch.
2
Install the handset battery.
a)
c) Place battery pack
d) Replace
4
Remove battery
compartment
cover by pressing
on the
indentation
and sliding
downward.
b) Plug battery pack
and wires in
compartment.
cover by
sliding it up
into place.
connector into
handset. Use only
AT&T battery 3301
(SKU#91076).