English
Preparing the Single Charger
Connect the AC adapter to the single charger by following the steps below.
1. Insert the DC connector of the AC adapter into the DC-in connector on the single charger securely to the
bottom.
2. Insert the AC cable connector into the AC inlet of the AC adapter securely to the bottom.
3. Fully insert the power plug securely into the grounded outlet.
4. Set the label side of the AC adapter facing down.
Charging the Printer
Charge the printer by following the steps below.
1. Set the printer in the single charger. Push down the printer until it clicks.
①
②
③
13