Using The Klickfix Adapter - Invacare Fox User Manual

Hide thumbs Also See for Fox:
Table of Contents

Advertisement

1.
Open the upper Velcro fastener.
2.
Place the lower end of the walking cane or the crutches in the
container at the bottom.
3.
The walking cane or the crutches can be secured at the upper
end using the Velcro fastener.

4.3 Using the KLICKfix adapter

Your mobility device can be fitted with the mini-adapter from the
Rixen + Kaul KLICKfix system. To this you can attach various
accessories such as the cellphone case supplied by Invacare, which
you can use to transport your cellphone, sports glasses etc.
Risk posed by unsecured accessories
Accessories can fall off and get lost if they are not
properly secured.
– Check that the accessory is correctly locked in and
seated securely every time you use the mobility device.
Risk of breakage due to excessive load
The KLICKfix adapter can break if too great a load is
applied.
– The maximum permitted load on the KLICKfix
adapter is 1 kg.
1577074-B
Securing the accessory:
1.
Push the accessory into the KLICKfix adapter.
The accessory locks in securely.
Removing the accessory:
1.
Press the red button and remove the accessory.
The adapter can turn in 90° steps, allowing you to attach an accessory
from any of four different directions. Please refer to the installation
instructions which are available from your Invacare dealer or directly
from Invacare.
More information on the KLICKfix system is available at
http://www.klickfix.com.
Accessories
21

Advertisement

Table of Contents
loading

Table of Contents