Important Notes On Operation; Specifications - Sony CBK-55BK Operation Manual

Important Notes on
Operation
Use and storage locations
The life expectancy of the electrolytic capacitor is about 5
years under normal operating temperatures and normal
usage (8 hours per day; 25 days per month). If usage
exceeds the above normal usage frequency, the life
expectancy may be reduced correspondingly.
Do not subject to severe shocks
Damage to the case or internal components may result.
In the event of operating problems
If you should experience problems with the unit, contact
your Sony dealer.
Operation and storage environment
Store in a level place with air conditioning.
If the unit gets wet, make sure it is completely dry before
storage.
Avoid use or storage in the following places:
• Extremely hot or cold places
• Places with high humidity
• Places with strong vibration
• Near strong magnetic fields
• In places where it receives much direct sunlight, or near
heating equipment
Note about the battery terminal
The battery terminal of this unit (the connector for battery
packs and AC adaptors) is a consumable part.
Power may not be supplied to the unit properly if the pins
of the battery terminal are bent or deformed by shock or
vibrations, or if they become corroded due to prolonged
outdoor use.
Periodic inspections are recommended to keep the unit
working properly and to prolong its usable lifetime.
Contact a Sony service or sales representative for more
information about inspections.
On condensation
If the unit is suddenly taken from a cold to a warm location,
or if ambient temperature suddenly rises, moisture may
form on the outer surface of the unit and/or inside of the
unit. This is known as condensation. If condensation
occurs, turn off the unit and wait until the condensation
clears before operating the unit. Operating the unit while
condensation is present may damage the unit.
48
Important Notes on Operation / Specifications

Specifications

General
Dimensions (W × H × D)
Approx. 170 × 182 × 371 mm
3
(6 / × 7
4
(see page 50)
Mass Approx. 2.2 kg (4 lb. 14 oz.) (Body and
battery adaptor)
Power Requirements
DC 12 V (11 V to 17 V)
Power Consumption
Approx. 3.8 W (Body and battery
adaptor)
Operating temperature
0°C to 40°C (32°F to 104°F)
Operating humidity
20% to 90%
Storage temperature
–20°C to +60°C (–4°F to +140°F)
Input/output
Expansion interface connector
144-pin, supplying power
Audio input XLR-type 3-pin (×2), LINE / AES/EBU /
MIC / MIC+48V selectable
LINE: +4/0/–3 dBu
AES/EBU: AES3 standard
Audio output XLR type, 5-pin, +4/0/–3 dBu (balanced)
Microphone input
XLR type, 5-pin, –70 dBu to –30 dBu
Headphone output
Stereo mini jack
WRR D-sub 15-pin
Analog CH1: –40 dBu
Digital CH1/CH2: –40 dBFS
Battery Adaptor
DC input XLR-type 4-pin, 12 V DC
DC output 4-pin, 12 V DC (maximum rated current:
1.8A)
LIGHT 2-pin, 12 V DC (less than 50 W)
Supplied Accessories
Battery adaptor (service part number: A-2067-625-) (1)
Rod (Φ 15 mm × 250 mm) (2)
Headphone plug adaptor (L type) (1)
Handle (service part number: A-2068-023-) (1)
Microphone holder (pre-attached to the handle) (service
part number: A-2068-182-) (1)
Slide plate (service part number: A-2070-502-) (1)
Tape measure hook (service part number: 4-458-622-) (1)
VF connector protector (service part number: A-2068-
183-) (1)
1 5
/ × 14 / inches)
4 8