Wiring Connections; Removal Of The Main Unit - Boss 610UA User Manual

INSTALLATION(CONT.)
- Only use speakers with 4 ohms impedance.
!
- Do not attach the control panel to the chassis before wiring is complete.
- The maximum current of the auto antenna is 200mA.

Wiring Connections

WIRING
DIAGRAM
Radio Antenna
White:Front Left PRE-AMP Output
Red: Front Right PRE-AMP Output
Red: Rear Right PRE-AMP Output
White: Rear Left PRE-AMP Output
CAUTION
+12V DC
NEGATIVE
GROUND

Removal of the Main Unit

1.
Remove the metal strap from the main unit.
2.
Remove the plastic trim out from the main unit.
3.
Insert a bracket key into the left and right side of the main unit and draw the unit out of
the mounting sleeve.
Purple +
Rear Right Speaker
Purple/Black -
Gray +
Front Right Speaker
Gray/Black -
Green +
Rear Left Speaker
Green/Black -
White +
Front Left Speaker
White/Black -
15
ACC + (Red)
GND - (Black)
ANT + (Blue)
Power B + (Yellow)
3