Table of Contents
Advertisement
Digital input selection switch /
DIGITAL IN
Remote control
Main unit
•
This switch is pressed when using this
unit as a D/A converter.
Each time the DIGITAL IN switch is
1.
pressed, the display changes as
follows. COAXIAL →
OPTICAL 2
→
INTERNAL
player)
The following sampling frequencies are sup -
ported for digital inputs: 32 kHz, 44.1 kHz, 48
kHz, 88.2 kHz, 96 kHz.
2. The selected input type and sam-
pling frequencies appear on the
main unit display.
• The display indicates the content of sampling
frequency data included in the channel status which
IEC60958-3 (Digital audio interface - Part 3: Consumer
applications) specifies.
Some output devices may output channel status data
whose content is different from the actual sampling
frequency. In such a case, the contents of channel
status data are indicated on the display instead of the
actual sampling frequency.
Or some devices or sources may output the sampling
frequency data which means "Not to indicate the
sampling frequency". In such a case, "UNKOWN"
appears on the display.
• There may be a case where the display indicates
"LOCK" shortly, and then "UNLOCK". (The reverse
case is also possible).
That is because the former state (LOCK/UNLOCK) is
indicated for approx. 0.5 seconds since an input signal
is changed until the circuit gets stable.
OPTICAL 1
→
(Internal
SUPER AUDIO CD PLAYER D-08
Digital output selection switch /
DIGITAL OUT
Remote control
Main unit
•
This switch is pressed when turn on
or off the digital audio output.
Each time the switch is pressed, the
output can be turned on or off.
It is impossible to output the digital audio signal
when playing back the HD layer of Super Audio
CD.
At this time, the DIGITAL OUT indicator turns
off.
It is possible to turn on or off the digital audio
output when playing back the CD layer of Hybrid
Super Audio CD.
DSD/PCM selection switch / DSD/PCM
Remote control
•
Main unit
When playing back the HD (or SACD)
layer of Super Audio CD, this switch
is pressed to select whether to input
DSD signals from the disc directly to
the D/A converter IC or to convert DSD
signals into PCM signals before input-
ting to the D/A converter IC.
DSD/PCM selection is not functional under the
following conditions
• When playing back a CD
• When playing back the CD layer of Hybrid
Super Audio CD
• When a digital input is selected
44
Advertisement
Table of Contents
