Building In - Electrolux EOG621B Service Manual

LOCATION OF APPLIANCE
The appliance may be located in a kichen, a
kitchen/diner or bedsitting room but not in a
bathroom, shower room or bedroom.
It is essential that there is a minimum clearance of
3 mm between the top surface of the appliance and
the inside top of the cabinet. The unit must be fitted
into a cabinet conforming to Fig. 22.
This oven unit may be used in a Built-in or a Built-
under situation (see relevant diagrams). If the
appliance is to be installed under a hob, it is
recommended that the hob be installed before the
oven unit.
Please ensure that when the oven is installed it is
easily accessible for the engineer in the event of
a breakdown.

BUILDING IN

The surround or cabinet into which the oven will be
built must comply with these specifications:
• the dimensions must be as shown in the relevant
diagrams;
• the materials must withstand a temperature
increase of at least 60°C above the ambient
temperature;
• proper arrangements must be made for a
continuous supply of air to the oven to prevent the
oven from overheating.
Dimensions of the oven and recess required are
given in the relevant diagrams (in millimetres).
TSE-P 10.00 FV
BUILDING IN
Fig. 21
Fig. 22
Fig. 23
Fig. 24
21/38 599 34 41-93