Table of Contents
Advertisement
Chapter
02
Protecting your product
against theft
CAUTION
Do not attempt to detach the front panel
while DISC/SD is in the eject position.
Do not attempt to detach the front panel
while data is being written to USB/SD.
Doing so may cause the data to become
corrupted.
After the front panel has been detached,
the attaching plate will move back to its
original position automatically.
Be careful not to let hands or other
objects get caught behind the monitor as
it is moving back.
Please make sure that the front panel is
in its original position while the vehicle is
in motion.
It is dangerous to drive with the front
panel sticking out.
Do not place beverages or other objects
on top of the front panel while it is fully
open.
Important
Handle the front panel with care when
removing or attaching it.
Avoid subjecting the front panel to exces-
sive shock.
Keep the front panel out of direct sun-
light and high temperatures.
If removed, replace the front panel on the
unit before starting up your vehicle.
■ Removing the front panel
1 Press the
button.
2 Touch the following key.
The front panel automati-
cally slides toward you.
8
Engb
3 Slide the dial at the bottom of the
front panel to the right, and lift up
the front panel while pushing down
on the dial.
4 Put the front panel into the pro-
vided protective case for safe
keeping.
■ Attaching the front panel
1 Slide the front panel into the top of
the unit and push it into place.
Slide the inserter on the front panel into the
insertion slot on top of the unit and push it
into place.
2 Push on the bottom of the front
panel until it clicks into place.
Notes on using the LCD panel
WARNING
Keep hands and fingers clear of this
product when opening, closing, or
adjusting the LCD panel. Be especially
cautious of children's hands and fingers.
Do not use with the LCD panel left open.
If the LCD panel is left open, it may result
in injury in the event of an accident.
CAUTION
Do not open or close the LCD panel by
force. This may cause a malfunction.
Do not operate this product until the LCD
panel has completely opened or closed.
If this product is operated while the LCD
panel is opening or closing, the LCD
panel may stop at that angle for safety.
Do not place a glass or can on the open
LCD panel. Doing so may break this
product.
Adjusting the LCD panel angle
1 Press the
button.
2 Touch the following keys to adjust
the angle of the LCD panel.
Laying the panel down.
Returning the panel to the
upright position.
3 Touch the following key.
Returns to the previous
screen.
p The adjusted angle of the LCD panel will
be memorised and the LCD panel will
automatically return to that angle the next
time the LCD panel is opened or closed.
Inserting/ejecting/connecting
media
CAUTION
Do not insert anything other than a disc
into the disc-loading slot.
Do not insert anything other than SD
memory cards into the SD card slot.
Ejecting an SD memory card during data
transfer can damage the SD memory
card. Be sure to eject the SD memory
card by the procedure described in this
manual.
Do not press the
button when an SD
memory card is not fully inserted. Doing
so may damage the card.
Do not press the
button before an
SD memory card has been completely
removed. Doing so may damage the
card.
■ Inserting and ejecting a disc
Inserting a disc
1 Press the
button.
2 Touch the following key.
Opens the LCD panel.
3 Insert a disc into the disc-loading
slot.
The disc is loaded, and the LCD panel
closes.
Ejecting a disc
1 Press the
button.
2 Touch the following key.
The LCD panel opens, and
the disc is ejected.
3 Remove the disc, and press the
button.
The LCD panel closes.
Advertisement
Table of Contents
