AT&T 900 MHz User Manual page 12

Select Your Announcement
NOTE: For information about how to record your announcements, see
page 13.
You can record up to three different announcements — A, B, and AO.
•
Announcements A and B are used when you want the system to record
•
callers' messages. Announcement AO (Announce Only) is used when
you want to give information to callers without accepting messages.
By selecting A, B, or AO, you decide which announcement your callers
•
will hear when the system answers a call (the system comes set to A).
Press 9 (SETUP) until the system announces "Selected
1
announcement is...."
Press 4 (REPEAT) or 6 (SKIP) to choose announcement A, B,
2
or AO.
Press 9 (SETUP) when your choice is announced and displayed.
3
Ring Select / Toll Saver
Choose how many times the phone will ring before the system answers a
call (preset to 4). Set for 1 to 7 rings, or set to SA for Toll Saver. With Toll
Saver active, the system answers after two rings when you have new
messages and after four rings when you have no new messages.
Press 9 (SETUP) until the system announces "Number of rings...."
1
Press 4 (REPEAT) or 6 (SKIP) to choose Ring Select setting.
2
Press 9 (SETUP) when your choice is announced and displayed.
3
Audible Message Alert
When Message Alert is on, the base beeps once every 15 seconds when
new mesages have been received. The Message Window displays
and for off.
Press 9 (SETUP) until the system announces "Message Alert is...."
1
Press 4 (REPEAT) or 6 (SKIP) to choose your setting.
2
Press 9 (SETUP) when your choice is announced and displayed.
3
FEATURE SETUP
for on
11