Pci Device Information; Boot Order For Riser 2; Pci Card Dimensions; Table 21. Riser 2 Slot Information - Dell POWEREDGE R510 Technical Manualbook

Dell
Slot1 (Gen2)
Slot2 (Gen2)
One x16 PCIe Gen2 slot(slot 1, x16 connector with x16 routing) for full-height full-length cards, and
•
connected to the IOH
One x4 PCIe Gen2 slot(slot 2, x8 connector with x4 routing) for dedicated storage controller card, and
•
connected to the IOH
• System supports 25W maximum power for the slot 1 and 15W for slot 2
The lower power support on slot 2 is due to system thermal limitations instead of system power
•
requirements
• The PowerEdge R510 does not support hot-swapping of PCIe cards
10.2.1

PCI Device information

IOH port 1, 2 (PCI Express Gen2 x4) – Broadcom BCM5716 Gigabit LOM
•
IOH port 3 (PCI Express Gen2 x4) – Slot 2
•
• IOH port 7/8/9/10 (PCI Express Gen2 x16) – Slot 1
10.2.2

Boot Order for Riser 2

Boot order for Riser 2 is as follows:
•
IOH port 1, 2 (PCI Express Gen2 x4) – Broadcom BCM5716 Gigabit LOM
•
IOH port 3 (PCI Express Gen2 x4) – Slot 2
•
IOH port 7/8/9/10 (PCI Express Gen2 x16) – Slot 1
10.2.3

PCI Card Dimensions

Offered via CUS KIT ONLY
Slot Location
Slot1 (Gen2)
Slot2 (Gen2)
PowerEdge R510 Technical Guide
Table 21.
Bandwidth
PCIe x16
PCIe x4
Table 22. PCI Card Dimensions: Riser 2
Bandwidth
PCIe x16
PCIe x4
Riser 2 Slot Information
Slot Location
PCIe x16
PCIe x8
Physical Slot
PCIe x16
PCIe x8
Height
Full Height
For dedicated storage controller
Height
Full Height
For dedicated storage controller
48
Length
Half Length
Length
Half Length