Ford 2016 F-150 Owner's Manual page 369

Rear Jacking Points
E183403
Note: Jack at the specified locations to
avoid damage to the vehicle.
1. Place the jack at the jacking point next
to the tire you are changing. Turn the
jack handle clockwise until the wheel
is completely off the ground.
2. Remove the lug nuts with the lug
wrench.
3. Replace the flat tire with the spare tire,
making sure the valve stem is facing
outward. Reinstall the lug nuts until the
wheel is snug against the hub. Do not
fully tighten the lug nuts until the wheel
has been lowered.
4. Lower the wheel by turning the jack
handle counterclockwise.
F-150 (TFC) Canada/United States of America, enUSA, Edition date: 08/2015, First Printing
Wheels and Tires
5. Remove the jack and fully tighten the
6. Stow the flat tire. See the Stowing the
7.
8. Unblock the wheels.
E166719
Stowing the Flat or Spare Tire
Note: Failure to follow the spare tire
stowage instructions may result in failure of
the cable or loss of the spare tire.
1.
2. Slide the wheel partially under the
3. Turn the jack handle clockwise until
366
lug nuts in the order shown. See
Technical Specifications (page 369).
Flat or Spare Tire.
Stow the jack and lug wrench. Make
sure the jack is fastened securely
before you drive. See Stowing the Jack
and Tools.
1
3
5
Lay the tire on the ground with the
valve stem facing up.
vehicle and install the retainer through
the wheel center. Pull on the cable to
align the components at the end of the
cable.
the tire is raised to its stowed position
underneath the vehicle. The effort to
turn the jack handle increases
significantly and the spare tire carrier
ratchets or slips when the tire is raised
to the maximum tightness. Tighten to
4
6
2