Park Aid; Park Brake - Ford 2016 F-150 Owner's Manual

Message
Hill Descent Driver Resume
Control
Hill Descent Control Fault
Hill Descent Control Off System
Cooling
Hill Descent Control Ready

Park Aid

Message
Check Front Park Aid
Check Rear Park Aid
Front Park Aid On Off
Rear Park Aid On Off

Park Brake

Message
To Release: Press Brake
and Switch
Park Brake Use Switch
to Release
Release Park Brake
Park Brake Not Applied
Park Brake Not Released
F-150 (TFC) Canada/United States of America, enUSA, Edition date: 08/2015, First Printing
Information Displays
Hill descent control mode is deactivated and you must
A hill descent system fault is present.
The hill descent system is cooling due to overuse.
The hill descent control system is ready.
The system has detected a condition that requires service.
Contact an authorized dealer. See Parking Aid (page 209).
The system has detected a condition that requires service.
Contact an authorized dealer. See Parking Aid (page 209).
Displays the park aid status.
Displays the park aid status.
The electric parking brake is set and a manual release is
attempted without the brake pedal being pressed.
The electric park brake is set and an automatic release is
attempted but cannot be performed. Perform a manual
The electric park brake is set and your vehicle speed exceeds
3 mph (5 km/h). Release park brake before continued driving.
The electric park brake is not fully applied.
The electric park brake is not fully released.
133
Action
resume control.
Action
Action
release.