Advanced Options - Mitsubishi HS-U748 Owner's Manual

Advanced Features

Advanced Options

Using the remote control to operate your TV
The HS-U748 remote control can operate many of the frequently-
used functions of your TV. You only need one remote to operate
both your VCR and TV.
The HS-U748 remote control is pre-set to operate Mitsubishi
televisions, but it can also operate TVs from other manufacturers.
To set your remote control for your particular brand of television,
follow these instructions.
setting up your remote control to operate your TV
1 Turn off your TV.
2 On the HS-U748 remote control, set the VCR/TV slide switch to
the TV position.
3 While holding in SP/EP, press the code listed that corresponds
to the brand of your TV.
4 Press TV POWER on the HS-U748 remote control. Once your
TV has turned on, your remote is set up to operate your brand
of TV.
If your TV does not turn on, repeat step 3 using the next code
listed for the brand of your TV.
If none of the codes listed for the brand of your TV work, then
repeat step 3 several times, using a different code button until one
works. The possible code buttons are: 0, 1-9, MUTE, VOLUME
ª,º, CHANNELª,º and INPUT.
You do not need to perform this set-up again until you change the
batteries, set up your remote for another brand of television, or you
get a new TV.
Once you have correctly set your remote control to operate your
TV, you will be able to use the TV POWER, CHANNEL, VOLUME,
and number buttons to operate your TV.
Because of variations among models, some or all codes
may not work, or they may operate different functions than
expected for your particular TV. If this occurs, you may
need to use your TV remote control.
Sometimes manufacturers will change the remote control
codes for their products, or they will use more than one
code. If this is the case, your remote may not be able to
control your TV.
When you replace the batteries in your remote, the remote
may return to its initial setting (code button 1). Repeat the
steps above to reset your remote control. If you enter a
new code, the previous code will be erased.
IMPORTANT
Brand code
Brand of TV
buttons
Mitsubishi
1, 2, 3
Fisher 0
VOLUME ª
G.E.
Goldstar
2, 9
Hitachi
8
JVC MUTE
Magnavox 4
NEC
2, 9
Panasonic CHANNELª,º
Pioneer 6
Philips
4
VOLUME ª
Proscan
Quasar CHANNELº
RCA VOLUMEª
Sanyo
0
Sharp
3, 5
Sony VOLUMEº
Toshiba
7
Zenith
INPUT
45