Hd Receiver And Dolby ® Digital Receiver Or Decoder - Mitsubishi SR-HD5 Owner's Manual

HD Receiver and Dolby
Follow these steps indicated by the diagram below:
1) Connect an optical digital cable to the back of the HD receiver using the connector
marked DIGITAL AUDIO OUT. Connect the other end of this cable to the optical input
on the back of your Dolby Digital receiver or decoder.
2) Check the Owner's Guide for the Dolby Digital receiver or decoder for proper set-up and
operation.
Page 2-12
Mitsubishi SR-HD5 HD DIRECTV Plus Receiver
®
Digital Receiver or Decoder