Table of Contents
Advertisement
Unlocking Procedure
To remove the lock and its restrictions, highlight the
Unlock button and press the
When the UNLOCK SYSTEM pop-up screen appears,
L
you can use the
and
L
keys or the remote control
number keys to enter the four-digit passcode that you
used to lock the HD receiver earlier. If you enter the
passcode using the number keys, you will not see the
numbers appear on the screen.
After entering the passcode, highlight OK and press the
key on the remote control.
SELECT
Note: Once the HD receiver has been unlocked, all
limits and restrictions are removed!
Otherwise, choose Cancel to keep the lock in effect.
If you forget your four-digit passcode, you must call DIRECTV for assistance.
Note: When the HD receiver is used without DIRECTV
password can be cleared from the Service Test Screen. To access the Service
Test Screen, press the
then release. The smart card must not be inserted in the HD receiver.
Temporarily Overriding the Lock
There are times you may wish to temporarily remove
the restrictions imposed by locking. You can do this
without unlocking the HD receiver. You will be
prompted by an on-screen message when you have
this option to override the lock. When you press
, the OVERRIDE LOCK pop-up will be
SELECT
displayed. It looks and navigates just like the
UNLOCK SYSTEM pop-up panel.
Note: Once the correct four-digit passcode is entered, the HD receiver will
remain unlocked until you turn the HD receiver off. The next time you turn
the HD receiver on, all locks and limits will be enforced again.
HD Receiver's Menu System
key.
SELECT
and
L
keys on the front panel simultaneously and
SELECT
The UNLOCK pop-up screen
®
services, the
The OVERRIDE LOCK pop-up
Page 7-19
Advertisement
Table of Contents
