Table of Contents
Advertisement
Done
Highlighting the Done button on the screen and pressing the
will cause an exit from the SHOW TIMES screen and a return to the INFORMATION screen.
Video
Highlighting the Video button on the screen and pressing the
will return you to the last program you were viewing.
Guides
Highlighting the Guides button on the SHOW TIMES screen and pressing the
remote control will initiate a drop-down menu offering easy access to future programming
information. Simply select one of the listed times. After a few seconds, the selected guide will
appear.
PreSelect™
Use PreSelect to plan your evening or weekend
viewing. The PreSelect feature will initiate a drop-
down menu offering your PreSelect feature options.
To View
To View will mark the selected program to be
automatically tuned in when it airs. At the right time,
if the HD receiver is off, it will turn on and tune to the
appropriate channel. Your selected programs will be
identified on the on-screen guide with a check mark
(
) before the program title.
To Tape
To Tape is very similar to To View; however, if you
have connected your VCR to the HD receiver via the IR cable and have properly set the VCR
code from the Setup Menu, the chosen program will be recorded at the correct time. If the HD
receiver turned itself on to record the program, it will also remember to turn itself back off after
the program ends. Programs you have scheduled for taping will be identified with a videotape
icon (
) before the program title in the on-screen guide. For unattended recording using this
feature, refer to page 6-11.
Note: Only the PreSelect To View option appears when the unattended
recording capability is not available or when a program is not authorized for
taping. In this case, the HD receiver can still be scheduled to tune to it when it
comes on.
Don't PreSelect
Once a program has been scheduled for viewing, previewing, or taping, you have the option of
canceling the action. Schedules can also be canceled directly from the on-screen guide by
highlighting a scheduled program and pressing the
PreSelecting Programs from the Advanced Program Guide™
You can perform the PreSelect capability from within the program on-screen guides. Simply
highlight the program you want to schedule and press the
key cycles through the available options.
Advanced Program Guide™
key.
SELECT
SELECT
key on the remote control
SELECT
key on the remote control
SELECT
key on the
SELECT
The PreSelect™ screen
key. Each press of the
SELECT
Page 6-9
Advertisement
Table of Contents
