Turbotune; Done; Video; Set Channel - Mitsubishi SR-HD5 Owner's Manual

Hdtv receiver with direct plus receiver built-in
Table of Contents

Advertisement

TurboTune™

Highlighting the TurboTune button on the SETUP
screen and pressing the
SELECT
control displays the TURBO TUNE SETUP screen
shown at the right.
On the left are buttons for Done and Video, which are
explained below.

Done

Highlighting the Done button on the screen and
pressing the
key on the remote control causes
SELECT
an exit from the TURBO TUNE SETUP screen and
a return to the SETUP screen.

Video

Highlighting the Video button on the screen and pressing the
will return you to the last program you were viewing.
The TURBO TUNE SETUP screen is used to specify which nine channels will appear in the
TurboTune pop-up panel that displays when

Set Channel

L
Using the , , , and
L
keys, highlight one of the nine channel boxes. You can enter the desired
channel using the number keys on the remote control or by using the
while highlighting one of the channel boxes will also initiate a pop-up panel that will
SELECT
allow you to set the channel using the
front panel.

Installation

Highlighting the Installation button on the SETUP screen takes you to the INSTALLATION
screen, which contains utilities to facilitate installation of your satellite dish antenna. You can
also evaluate your system's signal strength via the INSTALLATION screen. This screen was
discussed in detail in Chapter 4, "Setting Up the Satellite Dish Antenna and Terrestrial Inputs."

VCR Setup

The VCR SETUP screen provides access to the
settings that will allow the HD receiver to
communicate the record and stop commands to your
VCR.

Brand

Using the
L
and
L
keys, search through the various
brands of VCRs that are supported. Related brands
that share the same control codes may be suggested.
You may want to experiment with these if you are
having difficulty finding a functioning code under
your VCR's own brand name.
Page 7-12
Mitsubishi SR-HD5 HD DIRECTV Plus Receiver
key on the remote
SELECT
L
and
L
keys on the remote control or the HD receiver's
The TURBOTUNE setup screen
key on the remote control
SELECT
is pressed.
and
The VCR SETUP screen
keys. Pressing

Advertisement

Table of Contents
loading

Table of Contents