1. Manuals
  2. Brands
  3. Mitsubishi Manuals
  4. TV Receiver
  5. HD-5000
  6. Owner's manual

Mitsubishi HD-5000 Owner's Manual

High definition tv receiver/controller
Hide thumbs Also See for HD-5000:
Table of Contents

Advertisement

Quick Links

HD-5000
HD-5000 HDTV Receiver/Controller
DEVICE
A/V RESET
CANCEL
VOL –
POWER
High Definition TV
Receiver/Controller
Owner's Guide
visit our website at
w w w.m it s u bi s h i-t v.c om
MENU
ENTER
FORMAT
CH+
ADJUST
VOL+
CH –
SYSTEM
RESET

Advertisement

Table of Contents

Troubleshooting

loading

Related Manuals for Mitsubishi HD-5000

Summary of Contents for Mitsubishi HD-5000

  • Page 1 HD-5000 HD-5000 HDTV Receiver/Controller MENU ENTER DEVICE A/V RESET FORMAT CANCEL ADJUST VOL – VOL+ CH – SYSTEM POWER RESET High Definition TV Receiver/Controller Owner’s Guide visit our website at w w w.m it s u bi s h i-t v.c om...
  • Page 2 VGA input. Changes or modifications not expressly approved by Mitsubishi could void the user’s authority to operate this equipment. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

  • Page 3: Table Of Contents

    Connecting an External Digital TV (DTV, HDTV or DBS) Receiver (YPrPb) Connecting an External Digital TV (DTV, HDTV or DBS) Receiver (RGB) Connecting MonitorLink™ to a Mitsubishi monitor/TV or DVI monitor Connecting an HD Component (YPrPb) Connecting a Computer with a VGA Monitor Output Connecting IR Output NetCommand®...

  • Page 4: Important Safeguards

    IMPORTANT SAFEGUARDS Please read the following safeguards for your HDTV Receiver and retain for future reference. Always follow all warnings and instructions marked on the television. 1. Read, Retain and Follow All Instructions Read all safety and operating instructions before operating the HDTV Receiver/Controller. Retain the safety and operating instructions for future reference.
  • Page 5 IMPORTANT SAFEGUARDS 12. Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

  • Page 6: Thank You

    We are honored that you chose Mitsubishi as your path to upgrading your high definition monitor display to a full HDTV. The HD-5000 is designed to become the cornerstone of your home entertainment system, offering the flexibility of using both digital sources and analog sources in an advanced, but simple to use single control system.

  • Page 7: Chapter One

    In This Section . . . CHAPTER ONE Special Features Unpacking Your New HDTV Receiver/Controller Front Control Panel Back Panel...
  • Page 8 MonitorLink™ and MonitorLink™ Control Connections All video signals, both analog and digital, received by the Mitsubishi HDTV Receiver/Controller are sent digitally to your Mitsubishi high definition plasma display monitor or HD upgradeable TV maintaining all high definition signal resolution.
  • Page 9 Unpacking Your New HD-5000 Please take a moment to review the following list of items to ensure that you have received everything including: ������������� ��� ��� �� ����� ������� � � � ����� � � � � � � �����...

  • Page 10: Front Control Panel

    When menus are not displayed, press to change the volume higher or lower. When menus are displayed, press to move the highlight left or right or move the slider controls left or right. Front Control Panel HD-5000 HDTV Receiver/Controller MENU ENTER...

  • Page 11: Back Panel

    MonitorLink. While MonitorLink provides the digital video signal, MonitorLink Control provides enhanced functioning such as automatic power ON/OFF and input selection. If you are not connecting a Mitsubishi plasma display monitor or Mitsubishi HD upgradeable TV with MonitorLink featues, MonitorLink Control can be used as an RS-C control signal input port with an...

  • Page 12: Digital Audio Output

    The card slot behind the cover allows the HDTV Receiver/ Controller software to be updated with expanded features by use of a compact flash card provided by Mitsubishi. The HDTV Receiver/Controller does not come with a card and does not require a card when it is first received. Do...

  • Page 13: Chapter Two

    Connecting an External Digital TV (DTV, HDTV or DBS) Receiver (YPbPr) Connecting an External Digital TV (DTV, HDTV or DBS) Receiver (RGB) Connecting MonitorLink™ to a Mitsubishi monitor/TV or DVI monitor Connecting HD Component (Y/Pr/Pb) Connecting a Computer with a VGA Monitor Output Connecting IR Output NetCommand®...

  • Page 14: Netcommand® Overview

    Figure 1. Connecting each Device *MonitorLink Control Cable is used only with Mitsubishi display monitors NetCommand Setup provides an edit option so you may delete a type of device you do not have, change the inputs you used for connecting each device, add devices not included in the presets above or turn off unused inputs. See Editing NetCommand Setup later in this chapter.

  • Page 15: Netcommand® Supported Devices

    NetCommand® Supported Devices Following is a list of devices, by several manufacturers, tested and shown to be compatible with the NetCommand control system. When you use these devices you will be able to control them without changing the setting of the remote control from HDTV Receiver/Controller to another product.

  • Page 16: Connecting An Antenna

    HDTV Receiver. They should be available at most electronic stores. LOOP ANT-B Mitsubishi strongly recommends against using antennas with twin flat leads. Twin flat lead antenna wires are subject to interference which may adversely affect the performance of the HDTV Receiver. We recommend using coaxial antenna cable.

  • Page 17: Connecting An Analog Antenna, Wall Outlet

    Note: -Ohm to -Ohm matching transformers are not provided with the HDTV Receiver. They should be available at most electronic stores. *Mitsubishi strongly recommends against using antennas with twin flat leads. Twin flat lead antenna wires are subject to interference which may adversely affect the performance of the HDTV Receiver.

  • Page 18: Connecting An Analog Vcr

    Connecting an Analog VCR VCR to Analog Antennas or Wall Outlet Cable (Figure 5) . Connect the incoming cable to ANT-A on the HDTV Receiver back panel. Note: Connect two coaxial cables as follows: . One from LOOP-OUT on the HDTV Receiver back panel to ANTENNA IN on the VCR back panel.

  • Page 19: Connecting An Audio/Video Receiver

    Connecting an Audio/Video Receiver Connecting an Audio/Video Receiver (Figure 8) . Connect a video cable from Monitor VIDEO OUTPUT on the back of the HDTV Receiver to the HDTV Receiver VIDEO INPUT on the back of the A/V Receiver. Note: If you have connected an S-VHS VCR to the A/V Receiver, then follow the same video connection using the S-Video cable and terminals on the HDTV Receiver and A/V Receiver (instead of the VIDEO...

  • Page 20: Connecting A Dvd Player

    Connecting a DVD Player or a Satellite Receiver with S-Video WARNING: For plasma displays or picture tube type projection TV’s do not display the same stationary images on the screen for more than % of your total TV viewing in one week. Examples of stationary images are letterbox top/bottom bars from DVD or other video sources, side bars when showing standard TV pictures on widescreen displays, stock market reports, video game patterns, station logos, black or bright Closed caption backgrounds, web sites or...

  • Page 21: Connecting An External Digital Tv

    Connecting an External Digital TV (DTV, HDTV or DBS) Receiver DTV Connectors and Adaptors (Figure 11) The HDTV Receiver/Controller back panel has  RCA- type connectors for the Input-DTV. The back panel of your external DTV receiver may use RCA-type connectors or BNC-type connectors.

  • Page 22: Connecting An External Digital Tv

    Figure 13. Connecting the DTV receiver with RGB video connections See Appendix B for RGB video signal compatibility information. For digital audio connections, see your DTV Receiver and A/V Receiver Owner’s Guides. DTV Receiver to HD-5000 HDTV Receiver Back Panel • G (green) to Y/G •...

  • Page 23: Connecting Monitorlink™ To A Mitsubishi Monitor/Tv Or Dvi Monitor

    Connecting MonitorLink™ to a Mitsubishi monitor/TV, DVI monitor or TV MonitorLink & MonitorLink Control Cable (Figure 14) Connection to a Mitsubishi display monitor with MonitorLink: . Connect a MonitorLink cable from the Mitsubishi HD- Receiver/Controller back panel to the Mitsubishi display monitor MonitorLink input.

  • Page 24: Connecting An Hd Component (Yprpb)

    IMPORTANT • The YPrPb output is not functional while MonitorLink/DVI is connected. • The YPrPb output of the HD-5000 may be resolution-restricted or blocked when the original signal carries copy protection flags. • When viewing the TV, if the upper part of the picture is distorted, connect the TV to the HD-5000’s S-Video output instead of YPrPb.

  • Page 25: Connecting Ir Output Netcommand® Control

    Connecting the IR Output NetCommand® Control IR Output NetCommand® Control Connection and Placement (Figure 17 this page, figure 18 next page) The emitters connected to these jacks are used by the NetCommand system to control other devices such as VCR, DVD players, Cable boxes and Satellite receivers. .

  • Page 26: Connecting The Ir Sensor Input Connection

    . Place the IR sensor end in a convenient place. The sensor can be secured in place using doublestick place. Note: When the IR sensor Input is connected the IR sensor on the front panel will not function. HD-5000 back panel LOOP ANT-A IR SENSOR INPUT Figure 19.

  • Page 27: Connections: Helpful Hints

    Connections: Helpful Hints Q My VCR (or other device) does not have two sets of stereo audio outputs; how can I connect this device’s audio to both the HDTV Receiver and the A/V Receiver? A. There are two solutions: . Connect the single set of stereo audio outputs to the HDTV Receiver only.
  • Page 28 IMPORTANT WARNING: For plasma display monitors and picture tube rear projection display monitors, when using the VGA input, do not leave stationary, toolbar, or partial images on-screen for extended periods of time. Mix the types of pictures shown. Uneven plasma display or picture tube aging is NOT covered by your warranty.

  • Page 29: Chapter Three

    In This Section . . . CHAPTER THREE NetCommand® Setup - Getting Started Programming the Remote Control to Control the HD-5000 and Net Command® NetCommand® Setup Edit NetCommand®...

  • Page 30: Netcommand® Setup - Getting Started

    To use your HDTV Receiver/Controller’s NetCommand feature, you need to provide some detailed information during the setup of your Mitsubishi HDTV Receiver. You must identify the Manufacturer of each device that is connected to the HDTV Receiver. For each device,...

  • Page 31: Programming The Remote Control To Control The Hd-5000 And

    IEEE  devices and selected NetCommand supported IR devices. See the NetCommand . Guide for details. . To operate the Mitsubishi HDTV display monitor independently from the HDTV Receiver move the slide switch to the TV position:...

  • Page 32: Netcommand® Setup

    NetCommand® Setup When you first Power On your new Mitsubishi HDTV Receiver, the initial setup screens appear. In order to use NetCommand, select these screens after you have connected the compatible equipment to the HDTV Receiver. NetCommand supports the automatic switching of audio and video inputs using only the HDTV Receiver Remote Control.
  • Page 33 HD-. The model number optimized for NetCommand will display at the bottom of the screen. A manufacturer’s name followed by a number (example: Mitsubishi ), indicates additional models are optimized. Other models from the same manufacturer are often compatible.
  • Page 34 DVD Player that is connected to the HD-. The model number optimized for NetCommand will display at the bottom of the screen. A manufacturer’s name followed by a number (example: Mitsubishi ), indicates additional models are optimized. Other models from the same manufacturer are often compatible.
  • Page 35 NetCommand® Setup, continued Review Screen (Figure 9) Once you have made all your device choices you will see the Review Screen. It is important to review the settings to ensure that they are correct. If necessary, you can navigate Back through the NetCommand Setup screens to make changes.

  • Page 36: Edit Netcommand

    Edit NetCommand® Mitsubishi’s NetCommand also offers ease of use when it comes to editing your home theater configuration. These screens are useful when you add or remove components, or if you want to change the device or input configuration. Edit NetCommand Screen...
  • Page 37 Edit NetCommand®, continued Delete (Figure 14) To delete a device or completely delete setup, select Delete from the Edit NetCommand screen. The Delete screen will display. You can choose to delete just a single device by selecting the device name to delete, or you can delete the entire NetCommand configuration.
  • Page 38 Edit NetCommand®, cont’d. The following screens are a part of the Add device or Change device modes. Name Screen (Figure 17) The Name screen allows you to change the default name for each device to a custom name of up to eight characters selecting from letters, numbers, and nine different symbols, including a blank space.
  • Page 39 Edit NetCommand®, continued Monitor Out to AVR Screen (Figure 21) This screen is shown only if an A/V Receiver is the device being added or edited. The Monitor Out to AVR screen allows you to select the input on the A/V Receiver that is connected to the Monitor Output of the HDTV Receiver.
  • Page 40 IR code as a device previously added. You can specify the IR setting for the new device. For example, for the second Mitsubishi VCR you can specify the IR Code setting to VCR-B, if the primary Mitsubishi VCR is using the VCR- A IR code.

  • Page 41: Chapter Four

    In This Section . . . CHAPTER FOUR 3D Graphical ViewPoint® Menu System Device Selection Menu PIP/POP Device Selection Menu Menu Screens (Overview) Setup Menu Antenna Menu Clock Menu: Auto, Manual Settings Closed Captions Menu V-Chip Menu Timer Menu A/V Settings Menu...
  • Page 42 Your HDTV Receiver has a special control system called NetCommand® that will control IEEE  devices and selected older devices. For instructions on operating these control features, see the NetCommand . Guide. Your HDTV Receiver also has Mitsubishi’s exclusive D graphical...
  • Page 43 Device Selection Menu When you press the DEVICE button on your remote control, the Device Selection menu appears. If NetCommand® is not set up, the Device Selection menu allows you to directly select the input for viewing. After NetCommand is set up the Device Selection menu allows NetCommand to select the device for viewing, select audio from the display monitor speakers or A/V Receiver and power compatible devices On or Off.
  • Page 44 PIP/POP Device Selection Menu PIP/POP Device Selection Menu (Figure 3) When you press the PIP DEVICE button on the remote control, the PIP Selection menu displays. The PIP Selection menu is similar to the Device Selection menu except in the Video Section the PIP (or subpicture) is selected as the source instead of the TV and the Audio and Connection Sections are not displayed.
  • Page 45 Menu Screens (Overview) Setup, Antenna, Clock, Captions Setup Menu (Figure 4) Add, change, review or delete NetCommand® settings and devices. Change the order of icons displayed on the Device Selection menu, turn on or off the transport menu, and select English or Spanish as the language for the menus and on-screen displays.

  • Page 46: Timer Menu

    Menu Screens (Overview), V-Chip, Timer, Audio/Video V-Chip Lock Menu (Figure 8) Block or allow programing based upon rating signals sent by the broadcast station, or lock the entire HDTV Receiver by time. Figure 8. V-Chip Lock Menu Timer Menu (Figure 9) Set your HDTV Receiver to tune to a pre-selected device or channel and turn on if the HDTV Receiver is Off.
  • Page 47 Setup Menu: Edit NetCommand® Button, Icon Position Edit NetCommand Button (Figure 11) Edit NetCommand button displays the Edit NetCommand Menu (refer to Edit NetCommand section in Part  of this book.) Edit NetCommand provides the following options: • ADD - Addition of new devices. •...
  • Page 48 Setup Menu: Language, Transport Language Menu (Figure 13) Display the on-screen menus in either English or Spanish (Español). The first time your HDTV Receiver was powered on, you were requested to select an on-screen menu language. After initial set up, the language can only be changed on this screen.
  • Page 49 Antenna Menu: Antenna, Memorize, Channel, Memory and Name Antenna Menu (Figure 15) Select Ant-A, Ant-B, or Ant-DTV. You can memorize channels, add or delete channels, and add channels to an SQV (SuperQuickView™) list for each Antenna. For Ant- A and Ant-B, you can name channels. ����...

  • Page 50: Antenna Menu

    Antenna Menu: SQV (SuperQuickView™) SQV (SuperQuickView™) Using The Menu Screen (Figure 16) SQV (SuperQuickView™) allows you to put together lists of your favorite channels from Ant-A, Ant-B and Ant- DTV. You can store channels in any of the  different SQV memory banks and store the same channel in multiple memory banks.

  • Page 51: Clock Menu: Auto, Manual Settings

    Clock Menu: Auto, Manual Settings Clock Setting (Auto) (Figure 18) The Clock Setting (Auto) will automatically set the day and time using Extended Data Service (XDS) time data. This data is automatically retrieved on Ant-A or Ant-B from a PBS channel or other channel carrying this service. Some channels may send incorrect time information;...

  • Page 52: Closed Captions Menu

    Closed Captions Menu (Overview) Closed Captions Menu (Figure 20) On analog channels (Ant-A or Ant-B or from Inputs -), broadcasters can send either Standard or Text closed captioning. Standard Closed Captions follow the dialogue of the characters on-screen and display in small sections of the screen.

  • Page 53: Analog Captions

    To make the analog closed captions easier to read, you can choose to display the background color as either black or gray behind the captions. If you use Closed Captions frequently, Mitsubishi recommends gray for the background to reduce uneven aging of the plasma display or projection TV tubes.
  • Page 54 Closed Captions Menu: Digital Settings: Appearance, Font, Background, Digital Settings Appearance (Figure 23) The Closed Captions provider sends digital closed captions with default options. You may customize the Closed Captions appearance by seletion the Custom option. Figure 23. Digital Captions Settings Menu Font 1.Type Style Text (font) choices are:...

  • Page 55: V-Chip Menu

    V-Chip Menu: Defined, Entry, Passcode, Start Time and Stop Time V-Chip Entry (Figure 24) V-Chip allows you to Block or Allow programs based upon rating signals sent by the broadcasting station. The HDTV Receiver comes from the factory with the V-CHIP in the Off setting.
  • Page 56 V-Chip Menu: V-Chip Rating Information Guide V-Chip Signal Information When provided by the broadcaster, V-Chip ratings can be used to control which programs can be viewed or will be blocked. When V-Chip ratings are sent, you will see the ratings when you change the channel or when you press the INFO button on the remote control.
  • Page 57 V-Chip Menu: Lock By Time Lock By Time (Figure 27) Lock by Time will allow you to lock the entire HDTV Receiver during specific hours. Use ADJUST to select ON or OFF then use ADJUST to move to the “Lock Time” option box. Lock by Time, Lock Time, and Unlock Time (Figure 27)

  • Page 58: Timer Menu

    This includes sub-channels for Ant-DTV. When the HDTV Receiver is connected to a Mitsubishi display monitor or TV using both MonitorLink™ and MonitorLink Control, the display monitor will turn on automatically.

  • Page 59: A/V Settings Menu

    A/V Settings Menu: Memory Reset, Settings, Video Mute, Black Enhancement, Remote Control Buttons A/V Memory Reset A/V Memory Reset allows you to select the device which will have the A/V Settings returned to the original factory settings. To return a device’s memory to the original factory settings, select the device and then press ENT.
  • Page 60 A/V Settings Menu: Audio Out to Speakers Audio Out to Display (Figure 31) This selection will turn on or off the Audio Output to Display that sends the sound to the display monitor’s internal or directly connected speakers. You may select Off when sending the sound through a separate stereo system or surround sound A/V receiver.

  • Page 61: Audio Settings

    A/V Setting Descriptions: Audio NOTE: The effects of the Audio Settings of Bass, Treble, Balance and Surround will be heard only when using the audio output to display and the speakers connected directly to the display monitor. Audio Settings ◊ Bass Enhances or reduces low-frequency sound.

  • Page 62: Video Settings

    A/V Setting Descriptions: Video NOTE: If your display monitor has similar video settings, these should be set to a neutral (center) position before adjusting the video settings for the HDTV Receiver. Video Settings ◊ Contrast Provides a slider to adjust the white-to-black level. Low contrast shows a variety of shades in darker images, while high contrast shows darker images more uniformly black and makes colors appear more vibrant.
  • Page 63 If you experience strong bending while playing back video tapes, try the Level  and Level  settings, using ADJUST and use the one that shows the least amount of bending. VCR compensation affects all analog i inputs independently. VCR Compensation for model HD-5000 852B096A10...

  • Page 64: Chapter Five

    In This Section . . . CHAPTER FIVE Remote Control Functions Important Notes Regarding Stationary Images Appendix A: Lock Bypass Instructions Appendix B: Input Connection Compatibility Appendix C: Remote Control Programming Codes Appendix D: Cleaning and Service Appendix E: Troubleshooting Appendix F: Using the System Reset Button Appendix G: On-Screen Information Display Appendix H: Outputs and Copy Protection...
  • Page 65 . PIP/POP: Cycle through PIP and POP display choices. . EXCH: Exchange PIP or POP and main picture. . SLEEP: Set the Mitsubishi TV to turn off within  hours. Only works when slide switch is set to TV. . PIP DEVICE: Displays PIP Selection menu to select the PIP or POP device source.

  • Page 66: Installing The Batteries

    Remote Control Functions: Care and Operation ������������� ��� ������������� ��� ��� ��� ����� �� ����� �� ������� � � � ����� � � � � � � ����� � �� ��� ������ �� ��� ���� ���� ���� ���� � � ����...

  • Page 67: Channel Selection

    Remote Control Functions: Channel Selection, PIP and POP Channel Selection For Ant-A or Ant-B Channels: You may • Enter three numbers (for channel , press ), or • Press the channel number and ENT (for channel , press , then ENT), or •...
  • Page 68 Remote Control Functions: Using PIP and POP MAIN Side-by-Side PICTURE Figure 1 MAIN PICTURE Figure 2 POP 1 POP 2 MAIN POP 4 POP 5 PICTURE POP 7 POP 8 Figure 3 Ant-A 002 KCBS Standard TV-PG DLSV SQV-1 MAIN PICTURE Figure 4 Changing PIP/POP Device...
  • Page 69 Remote Control Functions: Display Formats This HDTV Receiver is designed to be used with both wide screen (:) display monitors and the narrower shaped (:) screens of older TVs and monitors. Many of the newer images are designed for : TVs. High Definition and anamorphic DVDs are examples.
  • Page 70 Display Format Examples Original Signal Non-anamorphic or Digital 4:3 Wide Screen Monitor Standard (not recommended, distorted) Expand (recommended for letterboxed) Zoom (not recommended, distorted) (recommended for letterboxed) Stretched (recommended for standard broadcast) Narrow (recommended for occasional use) Letterbox (not available for 4:3 signals) Narrow Screen Monitor Wide Screen Monitor Standard...
  • Page 71 See the NetCommand Guide . for details. The remote control will automatically turn on or off and select the MonitorLink™ input of your Mitsubishi display monitor or TV if it is equipped with and connected to both MonitorLink and MonitorLink Control.
  • Page 72 - with the next three digit code listed in step  for your equipment. Since the CABLE/DBS/DTV layer is used for the Mitsubishi HDTV Receiver, select VCR, DVD or Audio for your cable box or satellite receiver. IMPORTANT If you cannot turn the cable box On by pressing POWER, try pressing CH(channel) or the number buttons.
  • Page 73 • Satellite receiver • Cable Box • Mitsubishi CD player receiver, the audio position may be used in conjunction with selected Mitsubishi CD players. Your audio position must be programmed to ]. Some manufacturers may change their products, or they may use more than one remote control system.
  • Page 74 The most common functions are: POWER PLAY CHANNEL up/down Mitsubishi VCRs will be compatible with additional buttons (VIDEO, ADJUST, DEVICE MENU) Cable Boxes and Satellite Receivers POWER (on some models) 0-9 Number Buttons (on some models)

  • Page 75: Important Notes

    On-line (Internet) web sites: or any other stationary or repetitive computer style images. Closed Caption Backgrounds: When set to black or bright color, if Close Caption will be used frequently, Mitsubishi suggests the use of the gray or translucent background.
  • Page 76 When changing or deleting your passcode, you must use the remote control included with this HDTV Receiver. You cannot use a Mitsubishi remote control from another component or a “universal” remote. Bypassing the V-Chip Lock After you set the lock, you need your passcode to view a V-Chip locked program, view the locked HDTV Receiver, cancel the lock, or enter the V-Chip Lock menus.
  • Page 77 This page is intentionally blank...

  • Page 78: Vga Input

    As other manufacturers produce products that use IEEE 1394 AV/C and HAVi, they will be responsible for the development of their products to meet the standards of the technology, as well as compatibility testing with other products. Mitsubishi cannot be responsible for their efforts, and therefore cannot promise compatibility with these other products.
  • Page 79 Appendix C: Remote Control Programming Codes A/V Receivers Mitsubishi , , , , ,  Admiral  Aiwa , ,  B & K  Bose  Denon , , , ,  Fisher  Gerrard  Harman Kardon , , ...
  • Page 80 Appendix C: Remote Control Programming Codes, continued Satellite Receivers Mitsubishi  (same as ) Echostar/ Dishnetwork , , ,  Express VU   Gradient  Hitachi , ,  (HNS)Hughes  Magnavox ,  Panasonic  Philips , ...
  • Page 81 • DO NOT scrub or rub the HDTV Receiver harshly. Wipe it gently. Service If you are unable to correct a problem with your HDTV Receiver, consult your Mitsubishi dealer or a Mitsubishi Authorized Warranty Service Center. DO NOT adjust any controls other than those •...
  • Page 82 Appendix E: Troubleshooting Problem • The HDTV Receiver remote control does not work. • The HDTV Receiver/Controller takes several seconds to respond to channel commands. • You cannot access a channel. • On-screen displays appear each time you change a function. •...
  • Page 83 Appendix F: Using The System Reset Button Using The System Reset Button If the HDTV Receiver doesn’t respond to either the remote control or the front panel controls or will not power off, press the SYSTEM RESET button on the front panel with a pointed item like the point of a ball point pen or end tip of a paperclip.
  • Page 84 On Screen Information Displays When you turn on the HDTV Receiver, change Devices, change Channels or when you press the INFO button on the remote control the HDTV Receiver will display the current status. Below are the most common displays; please note that seldom or never do all of the different status indicators appear at the same time.
  • Page 85 MonitorLink, the HD- will automatically be compatible and send signals at the best possible scan rate. In most cases, the scan rate will be i, however all signals received in high definition will be sent to the Mitsubishi MonitorLink monitor in high definition. Signals with copy protection flags will not be blocked or resolution-restricted.
  • Page 86 Appendix I: Signal Sources and Scan Rates Input Signal Source Input Scan Rate Input Scan Rate Copy Protection i signals from none Ant-A, AntB, Inputs - i signals from Ant-A, AntB, Inputs - p signals from none Component  &  i signals from Component ...
  • Page 87 Appendix I: Signal Sources and Scan Rates YPrPb or HD Monitor Input Signal Source Output Scan Rate Input Scan Rate Copy Protection i signals from none Ant-A, AntB, Inputs - i signals from Ant-A, AntB, Inputs - p signals from none Component ...
  • Page 88 HD YPrPb TV’s or Monitors 24 IR Output NetCommand® Control 25 IR Sensor Input Connection 26 MonitorLink™ to a Mitsubishi monitor/TV, 23 Satellite Receiver with S-Video 20 VCR to Analog Antennas or Wall OutletCable, Connecting 18 VCR to Cable Box, Connecting 18...
  • Page 89 Controlling Non-NetCommand® Compatible A/V Products 71 Display Formats 68 Overview 64 Programming Codes 78 Programming the Remote Control to Control the HD-5000 and NetCommand® 31 Programming to Control Other Brands of Audio &Video Products 71 Special Functions 73 Removing SQV Channels 50 Screens, see NetCommand®...

  • Page 90: Warranty

    Demo Mode This HDTV Receiver/Controller has a demo mode for use in a retail store. To turn On/Off, display the Mitsubishi HDTV Receiver Menu, then press in sequence: , QV,  LICENSOR’S SUPPLIERS DO NOT MAKE OR PASS ON TO END USER OR ANY OTHER THIRD...
  • Page 91 2. THIS WARRANTY DOES NOT COVER cosmetic damage or damage to any other product where such damage is caused by unauthorized modification, alteration, repairs to or service of the product by anyone other than an authorized MITSUBISHI service center; physical abuse to or misuse of the product (including any failure to carry out any maintenance as described in the Owner’s Guide or any product damaged by excessive physical or...
  • Page 92 END-USER LICENSE AGREEMENT FOR EMBEDDED SOFTWARE IMPORTANT – READ CAREFULLY: This License Agreement is a legal agreement between you (either an individual or an entity) and Mitsubishi Digital Electronics America, Inc. (MDEA) for all software preinstalled and/or provided along with this HDTV Receiver/Controller (“Software”). By utilizing this receiver and Software, you agree to be bound by the terms of this License Agreement.
  • Page 93 To order replacement or additional remote controls or owner’s guides call () - visit our website at w w w.m it s u bi s h i-t v.c om © Mitsubishi Digital Electronics America, Inc. Written and Printed in the U.S.A. D A...
  • Page 94 NetCommand ® HD-5000 Owner’s Guide visit our website at w w w.m it s u bi s h i-t v.c om...
  • Page 95 This NetCommand 2.0 Guide describes specific information for using the NetCommand features of the HD-5000. For any other information regarding the HD-5000, please see the HD-5000 Owner’s Guide. This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights.
  • Page 96 Table of Contents Welcome To NetCommand® 2.0... 4 Special Features ... 5 Connecting IEEE 1394 Devices... 6 Adding IEEE 1394 Devices Automatically... 8 Device Selection Menu ... 11 Transport Menu... 12 Remote Control Buttons: Device Menu Button... 13 Guide Button ... 14 AV Disc Search ...

  • Page 97: Welcome To Netcommand® 2.0

    Welcome to NetCommand® 2.0 Your new Mitsubishi HDTV Receiver is equipped with NetCommand® ., the latest technology in home theater control. NetCommand technology combines the control of older IR controlled devices with the control of brand new IEEE  devices to make your television the “brain” of your home theater. By connecting all of your compatible A/V devices as mapped out in both the HD-...

  • Page 98: Special Features

    Special Features Device Selection Menu This menu allows you to: • Select the device for viewing on the display monitor. • Select display monitor speakers or A/V Receiver speakers for the audio. • Change a NetCommand® compatible A/V Receiver’s inputs automatically. •...

  • Page 99: Connecting Ieee 1394 Devices

    Included in the IEEE b systems are IEEE a to IEEE b converters to maintain compatibility with this HDTV Receiver and other IEEE a devices. Display Monitor MonitorLink /DVI or YPbPr cable HD-5000 HDTV Receiver/Controller MENU DEVICE ENTER Digital A/V RESET FORMAT...
  • Page 100 Connecting IEEE 1394 Devices, continued Figure 3. 4-pin connector Figure 4. 6 pin to 4-pin connectors 6 pin to 4 pin adaptor Figure 5. 6-pin connector 4-Pin Style vs. 6-Pin Style (Figures 3, 4, 5) There are two different types of connectors used for IEEE ...

  • Page 101: Adding Ieee 1394 Devices Automatically

    Adding IEEE 1394 Devices Automatically When an IEEE  device is connected into the HDTV Receiver network and is powered ON, the new device will automatically announce its presence. This process is called device discovery and can take up to  minute. Some non-audio/video or non-compatible IEEE ...
  • Page 102 VCR. For example, if the IEEE  device you have added is a Mitsubishi D-VHS VCR, and you have selected an analog connection as a second connection, then you will select Mitsubishi for the manufacturer.
  • Page 103 Adding IEEE 1394 Devices Automatically Compatible IEEE 1394 Devices It is possible to connect devices to the HDTV Receiver that have IEEE  connectors but are not compatible with the HDTV Receiver or with the NetCommand 1. Digital Video Signals The HDTV Receiver is able to decode MPEG...

  • Page 104: Device Selection Menu

    Device Selection Menu When you press DEVICE button on your remote control, the Device Selection menu appears. When NetCommand® has not been setup, the Device Selection menu allows you to select an input for viewing. When NetCommand is setup the Device Selection menu allows you to select the device for viewing, select audio from the display monitor speakers or A/V Receiver, power compatible devices On or Off, and verify the destination of signals.

  • Page 105: Transport Menu

    Transport Menu Displaying the Transport Menu (Figure 12) Selecting a VCR or DVD Player from the Device Selection menu will automatically display the Transport menu. This menu is also displayed when one of the transport buttons on the remote control is pressed while viewing these devices.

  • Page 106: Remote Control Buttons: Device Menu Button

    Remote Control Buttons: Device Menu Button ������������� ��� ��� ����� �� ������� � � � � � � � � � � ��� �� ������ �� ��� ���� ���� � � ���� ������ ���� ����� ���� ��� �� ������� ��� ������ ������...

  • Page 107: Guide Button

    Guide Button, AV Disc Search, Track List Screen Guide Button (Figure 13, page 13) The GUIDE button displays the on-screen programming guides. • For NetCommand® compatible satellite receivers and some cable boxes, the GUIDE button will display the on-screen programming guide for the receiver or cable box.

  • Page 108: Special Features Buttons

    Special Features Buttons, Manual Analog Recording Special Features (Figure 13, page 13) For both NetCommand® compatible traditional IR devices and IEEE  compatible devices, these buttons on your TV remote control may also operate the similar functions for the device: CHANNEL VOLUME MUTE...

  • Page 109: Netcommand® Controlled Recordings

    NetCommand® Controlled Recordings Recording Setup (Figure 15) Your HDTV Receiver is able to start and stop recordings automatically and send the signals from one external playback device to another external recording device. It is also able to convert digital signals from Ant-DTV and from IEEE ...
  • Page 110 NetCommand® Controlled Recordings, continued Note: When selecting channels, you may use the ADJUST Record List Screen (Figure 16) To view a list of all of your currently programmed recordings, select List from the Record/Connect screen. A maximum of  scheduled recordings are possible at a time.

  • Page 111: Netcommand® Controlled Peer-To-Peer Connections

    NetCommand® Controlled Peer-to-Peer Connections What is a Peer-to-Peer Connection? A peer-to-peer connection allows the IEEE  devices in your HDTV Receiver network to talk to each other without the further need of HDTV Receiver intervention once the peer-to-peer connection is established.

  • Page 112: Troubleshooting

    Problem • When a Device is selected from the Device Selection menu, the screen is blue (no signal source). • The Device does not respond to key presses from the remote. • The A/V Receiver is the selected audio source but there is no sound.
  • Page 113 Problem • There is no audio and video from the IEEE  device. • The IEEE  device cannot be selected. • The IEEE  Device is not listed in the Device Selection menu. • Cannot record to or from the IEEE  device, including Dub recordings •...
  • Page 114 Problem • The IEEE  plug does not fit into HDTV Receiver (too large). • An IEEE  device has been plugged in but does not appear in the Device Selection menu (not discovered). • Cannot see a picture from a DV Camcorder. •...

  • Page 115: Appendix: Netcommand® Controls

    Appendix: NetCommand® Controls NetCommand Compatible Traditional Devices (Analog) When Device Selection Menu is Displayed and the Device is Highlighted (Yellow Outline) REMOTE A/VReceiver CONTROL BUTTON POWER Power On/Off (toggle) DEVICE MENU GUIDE Changes between Digital and Analog audio FORMAT IEEE 1394 and HAVi Devices (Digital) When Device Selection Menu is Displayed and the Device is Highlighted (Yellow Outline) REMOTE Tuner/...
  • Page 116 Appendix: NetCommand® Controls When Net Command® Compatible Traditional Device is Viewed or Played Remote Control Receiver Button CH up/down Channel up/down VOL up/down Volume Up/Down MUTE Mute On/Off 0-9 (digits) number functions DEVICE Menu 1st press Transport Menu, 2nd press Setup Menu display HOME ENTer CANCEL...
  • Page 117 To order replacement or additional remote controls or owner’s guides call () - visit our website at w w w.m it s u bi s h i-t v.c om ©  Mitsubishi Digital Electronics America, Inc. Written and Printed in the U.S.A BA...

Table of Contents