The page includes the following fields:
Object
WAN Port:
Well-Known
Service Ports:
LAN Port:
LAN IP:
Protocol:
Enable:
For example: If you create a web server using port 80 on a LAN PC at the IP address of 192.168.0.100, and you
want WAN users to access such server via
do as follows:
Figure 5-4-2
Description
Enter the WAN service port.
The "Well-Known Service Port" lists commonly used protocol ports such
as:
Leviton S&A Controller (4369)
DNS (53)
FTP (21)
GOPHER (70)
HTTP (80)
NNTP (1190)
POP3 (110)
PPTP (1723)
SMTP (25)
SOCK (1080)
TELNET(23)
In case that you don't find the port ID you need, add it manually.
Enter LAN service port.
The IP address of a computer used as a server in LAN.
Includes TCP, UDP and Both.
Select "Both" if you are not sure about which protocol to use.
Check the "Enable" option to activate corresponding entry.
http://x.x.x.x:4000
-58-
User Manual of 47611-WG4
(x.x.x.x represents router's WAN IP address), then