Chapter 3. Connecting To The Router; System Requirements; Installing The Router - Leviton 47611-WG4 User Manual

3.1 System Requirements

Broadband Internet Access Service (Cable/xDSL/Ethernet connection)

One Cable/xDSL Modem that has an RJ-45 connector (not necessary if the Router is connected

directly to the Ethernet.)
PCs with a working Ethernet Adapter and an Ethernet cable with RJ-45 connectors

PC of subscribers running Windows 98/ME, NT4.0, 2000/XP, Windows Vista / Win 7, MAC OS 9 or

later, Linux, UNIX or other platform compatible with TCP/IP protocols
Above PC installed with WEB Browser

1. The Router in the following instructions means LEVITON 47611-WG4.
2. It is recommended to use Internet Explore 7.0 or above to access the Router.

3.2 Installing the Router

Before installing the Router, make sure your PC is connected to the Internet through the broadband service
successfully at this moment. If there is any problem, please contact your local ISP. After that, please install the
Router according to the following steps. Don't forget to pull out the power plug and keep your hands dry.
Step 1. Power off your PC, Cable/xDSL Modem, and the Router.
Step 2. Locate an optimum location for the Router. The best place is usually at the center of your wireless
network.
Step 3. Adjust the direction of the antenna. Normally, upright is a good direction.
Step 4. Connect the power adapter to the power socket on the Router, and the other end into an electrical
outlet. Then power on the Router.

Chapter 3. Connecting to the Router

-13-
User Manual of 47611-WG4