Table of Contents
Advertisement
2.
Setting IP address automatically
Select Obtain an IP address automatically, Choose Obtain DNS server automatically, as shown in the
Figure below:
Now click OK to save your settings.
4.1.2 Configure the IP Address Manually
Summary:
Set up the TCP/IP Protocol for your PC.
Configure the network parameters. The IP address is
254), Subnet Mask is 255.255.255.0, and Gateway is
1
Select Use the following IP address radio button.
2
If the Router's LAN IP address is 192.168.0.1, enter IP address 192.168.0.x (x is from 2 to 254), and
Subnet mask 255.255.255.0.
3
Enter the Router's LAN IP address (the default IP is 192.168.0.1) into the Default gateway field.
4
Select Use the following DNS server addresses radio button. In the Preferred DNS Server field, you can
enter the DNS server IP address which has been provided by your ISP
Figure 4-3
192.168.0.xxx
192.168.0.1
-17-
User Manual of 47611-WG4
("xxx" is any number from 2 to
(The Router's default IP address)
Advertisement
Table of Contents
