Table of Contents
Advertisement
MAC Clone
This section allows you to set router's WAN MAC address. You can either manually enter a MAC or copy your
PC's MAC to the router.
The page includes the following fields:
Object
WAN MAC
Address:
Restore to Factory
Default MAC:
Clone MAC:
Normally you don't need to change the default WAN MAC value. However, some ISP
may bind client PC's MAC address for Internet connection authentication. In this
case, simply enter such MAC in the WAN MAC Address field or click the "Clone
MAC" button. Note that the WAN MAC address in running status interface will be
updated accordingly.
Do remember to reboot the router to activate the new WAN MAC. DO NOT use the
"Clone MAC" feature if your ISP does not bind your PC's MAC.
Figure 5-2-14
Description
Displays router's current WAN MAC address, you can manually change
it.
Click it to restore router's WAN MAC to factory default value.
Click to copy your PC's MAC to router's WAN MAC Address field.
-42-
User Manual of 47611-WG4
Advertisement
Table of Contents
