Sterling S400 Instructions For Use Manual page 37

15.1 MODEL: STERLING S400
ISO 7176-15
OVERALL LENGTH
OVERALL WIDTH
TOTAL MASS (WITH BATTERIES)
MASS OF THE HEAVIEST PART
STATIC STABILITY DOWNHILL
STATIC STABILITY UPHILL
STATIC STABILITY SIDEWAYS
ENERGY CONSUMPTION (MAX. RANGE)
DYNAMIC STABILITY UPHILL
OBSTACLE CLIMBING
RAMP TRANSITION
MAX. SPEED FORWARD
MIN. BRAKE DISTANCE FROM MAX. SPEED
MAX. SPEED REVERSE
EFFECTIVE SEAT DEPTH
EFFECTIVE SEAT WIDTH
SEAT SURFACE HEIGHT
BACK REST ANGLE
BACK REST HEIGHT
FORE / AFT SEAT ADJUSTMENT
SEAT WEIGHT WITH SLIDE
TOP OF ARM REST TO SEAT
MIN. TURNING RADIUS
MIN. TURN BETWEEN WALLS
NOMINAL BATTERY VOLTAGE
REVERSING WIDTH
ADDITIONAL SPECIFICATIONS
MAXIMUM POTENTIAL RANGE
CONTROLLER CUT-OFF VOLTAGE
BATTERY CAPACITY
BATTERY FUSIBLE LINKS
BATTERY CHARGER LOOM FUSIBLE LINK
BATTERY CHARGER
MAX. KERB HEIGHT
GROUND CLEARANCE
REAR SUSPENSION TRAVEL
FRONT SUSPENSION TRAVEL
REAR WHEEL DRIVE
SCOOTER PUSH FORCE
CRASH TESTED
TYRE PRESSURE
MIN. MAX. COMMENTS
1345mm 1345mm STANDARD CONFIGURATION
645mm 645mm STANDARD CONFIGURATION
108.5kg 108.5kg STANDARD CONFIGURATION
- 35kg SEAT
- 8° 136KG USER
- 8° 136KG USER
- 8° 136KG USER
- 25 km TO ISO 7176-4 (SEE SECTION 9.13)
- 8°-18% 136KG USER
- 50mm STANDARD CONFIGURATION
8° 8° WITHOUT HIGH CENTRING
6 kph/ 4 mph STANDARD CONFIGURATION
- 4m WITH STANDARD PROGRAMMING
- 50% % OF FORWARDS SPEED
460mm STANDARD CONFIGURATION
460mm STANDARD CONFIGURATION
447mm 497mm TO SCOOTER FLOOR (3 POSITIONS)
-70° 60° FROM VERTICAL
525mm STANDARD CONFIGURATION
+100mm FROM REAR MOST POSITION
35kg STANDARD CONFIGURATION
230mm ARM REST SET AT 90°
3.03m STANDARD CONFIGURATION
1.98m STANDARD CONFIGURATION
24V 24V TWO 12V BATTERIES
1.98m
MIN. MAX. COMMENTS
36 KM INDUSTRY BENCHMARK (SECTION 9.15)
16V DRIVE STOPS
38Ah SEE OPTIONS
- 100A IN-LINE FUSE ON EACH BATTERY
- 15A
5A 5A AUTOMATIC CYCLIC
50mm
45mm
11mm UNLADEN
23mm UNLADEN
- - 4 WHEEL SCOOTER
100N IN FREE-WHEEL
NO
40psi
Sterling S-Series 37