Table of Contents
Advertisement
System Time: sets the system time;
Picture Output Mode: Select VGA or a TV system according to the display or monitor of the
output device;
VGA Mode: adjusts the parameters of the VGA output;
Auto System Logout: sets auto logout and logout time;
Monitor Mode: choose Free Mode or Page Mode. If choose Page Mode, the Layout max 16,
the other live video will be in the next page, you can turn a page choose other surveillance
pictures, the interface as following figure,
Transparency Setting: adjusts the transparency;
Record Length: Adjust the maximum length of a single video record, the slider from low to
high into 6th gear, they are:
1——64M（about 4min）
2——128M（about 8min）
3——256M（about 17min）
4——512M（about 34min）
5——1024M（about 68min）
6——2048M（about 136min）
The Record Length is advanced parameters, please use the default configuration. If you have
to adjust the values, please contact the project installer or supplier.
Notice: The PAL system is used in China, while NTSC is used in such regions as North
America and East Asia.Be sure to set system time correctly to avoid incorrect record time
and alarm recording time.
Figure 9-2 Page Mode
System Management
46
Advertisement
Table of Contents
