Kedacom NVR2820 User Manual page 45

Figure 6-3):
1) Select a sequence scenario from the sequence scenario list;
2) Select video sources to be sequenced from the Camera list;
3) et residence time for the selected video sources in Waiting Time (please
4) Select video sources and click Up or Down to change the sequence
5) Click Rename to change the scenario name;
6) Click Save to save the scenario into the scenario list;
7) Select Enable to start channel sequence.
When setting the residence time for video sources, if you check the Unified Waiting Time
check box, all selected video sources will have the same residence time.
Figure 6-3 TV Wall Camera Sequence
do not check the Unified Waiting Time check box);
order;
TV Wall Management
40