Kedacom NVR2820L Administrator's Manual
  1. Manuals
  2. Brands
  3. Kedacom Manuals
  4. DVR
  5. NVR2820L
  6. Administrator's manual

Kedacom NVR2820L Administrator's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

NVR Administrator Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NVR2820L and is the answer not in the manual?

Questions and answers

Related Manuals for Kedacom NVR2820L

Summary of Contents for Kedacom NVR2820L

  • Page 1 NVR Administrator Guide...

  • Page 2: About This Manual

    Appendix 1~4 Technical Specifications Appendix 5 Related Manuals NVR User Manual/NVR Quick Reference NVR2820L Quick Reference KDM201-D01H User Manual KDM201S Multi-port Encoder Quick Reference Lithium battery safety A CR2032 Lithium battery is used in the NVR, please confirm the type to avoid bombing when replaced.

  • Page 3: Table Of Contents

    Overview ............................1 NVR Model ......................... 1 KDM201S ........................... 2 Main Features ........................2 NVR Panels ........................5 1.4.1 NVR2820L Front Panel ....................5 1.4.2 NVR2820 Front Panel ....................5 1.4.3 NVR2820E Front Panel ....................6 1.4.4 NVR2860 Front Panel ....................6 1.4.5...
  • Page 4 Dial-up Network Settings ....................28 3.2.1 Dynamic Domain Name Server (DDNS) ..............28 System service ......................... 28 NAT Traversal Settings ..................... 29 Proxy Settings ........................30 Domain Name Service Settings ..................30 Video device Management ......................31 Automatic Networking ....................... 31 Add Video device ......................
  • Page 5 NVR Settings ......................50 2.4.3 Camera (DVS) Settings ..................... 50 Settings of Proxy Server ......................... 51 Firewall ............................54 Technical Specifications ........................55 NVR2820L ........................55 NVR2860 .......................... 56 NVR2820E ........................57 NVR2820 .......................... 59 KDM201S/ KDM201-D01H ....................60 Glossary ..............................62...

  • Page 6: Overview

    KDM201S is a convergence multi-port encoder with storage accessed either by camera or by IP Camera, and it offers surveillance solutions as the same with NVR series. The document describes NVR2820L, NVR2820, NVR2820E, NVR2860 and KDM201S with focus on the installation and configuration. For other operations, refer to the NVR User Manual.

  • Page 7: Kdm201S

    Overview KDM201S KDM201S is a convergence multi-port encoder, together with network cameras or cameras, offers a comprehensive surveillance solution for video encoding, decoding, storage, video display, and control, which can either organize network separately or register to surveillance platform. Figure 1-1 KDM201S Main Features The NVR and KDM201S surveillance system run by means of establishing a dedicated surveillance network or sharing with the service network, and the NVR Station help control surveillance system...
  • Page 8 Overview Recording and playback 1） triggered recording by: manual, schedule and alarm 2） Record management policy: including overwrite and backup policy 3） Records Management: including replay, query, backup, and delete 4） Records Replay: multi-video replay, synchronous replay and progress control Storage management 1）...
  • Page 9 Overview 2） NVR control by NVR Station NVR Station 1） View simultaneous multiple videos, of the same or different NVR. 2） Records management 3） Video unit management 4） alarm management 5） NVR record and snapshot 6） A number of NVR management (16 at most) 7）...

  • Page 10: Nvr Panels

    Overview NVR Panels 1.4.1 NVR2820L Front Panel Figure 1-3 Front Panel of NVR2820L 1.4.2 NVR2820 Front Panel Figure 1-4 Front Panel of NVR2820...

  • Page 11: Nvr2820E Front Panel

    Overview 1.4.3 NVR2820E Front Panel Figure 1-5 Front Panel of NVR2820E 1.4.4 NVR2860 Front Panel Figure 1-6 Front Panel of NVR2860 Notice: The ALARM LED blinks according to the alarm settings. Please refer to System Linkage in Chapter 5 of NVR User Manual.

  • Page 12: Nvr2820L Rear Panel

    Overview 1.4.5 NVR2820L Rear Panel Figure 1-7 Rear Panel of NVR2820L 1.4.6 NVR2820 Rear Panel Figure 1-8 Rear Panel of NVR2820 1.4.7 NVR2820E Rear Panel NVR2820E rear panel is similar with NVR2820, the following show the differences. Figure 1-9 Rear Panel of NVR2820E-9, -16...

  • Page 13: Nvr2860 Rear Panel

    Overview Video Output mode: if the DIP switch is set to VGA, video output through the VGA interface; if set to VIDEO, output through the TV interface. Select PAL or NTSL from the configuration interface. Figure 1-10 Rear Panel of NVR2820E-9D, 16D 1.4.8 NVR2860 Rear Panel Figure 1-11 Rear Panel of NVR2860 KDM201S Panels...

  • Page 14: Kdm201S Front Panel

    Overview 1.5.1 KDM201S Front Panel Figure 1-12 Front Panel of KDM201S 1.5.2 KDM201S Rear Panel Figure 1-13 Rear Panel of KDM201S If the VLAN dip is ON, all the modules can managed by the NVR; otherwise, they could be done by other software in the network.

  • Page 15: Kdm201S-C04E Encoder Module

    Overview 1.5.3 KDM201S-C04E Encoder module Connect the interfaces with DB25 converter: 1, 4*BNC video in 2, 4*RCA audio in 3, 4*RCA audio out 4, 4*RS485 5, 1*alarm out (switch) 6, 4*alarm in (switch) 7, running indicator KDM201S-C04E Model 4×BNC Video Interface H.264 Video Encoder D1、CIF、QCIF，DUAL STREAM...

  • Page 16: Kdm201S-D04 Decoder Module

    Overview 1.5.4 KDM201S-D04 Decoder module Connect the interfaces with DB25 converter: 1, 4*BNC video out 2, 1*RCA audio in 3, 1*RCA audio out 4, Decoding indicator KDM201-D04 Model 4×BNC Video Interface H.264、MPEG4 Video Decode D1、2CIF、CIF Resolution 1～25 fps Frame Rate 64Kbps～2Mbps Bit Rate 1×RCA...

  • Page 17: Inserting A Module

    Overview 1.5.6 Inserting a module KDM201S has eight slots at the rear panel which is used for inserting modules, such as encoder and decoder. Clear the dusty on the stand before inserting a module, and take out the encoder or decoder module from the anti-static package, then check the name on the module to confirm it is coordinate with the label on the package.

  • Page 18: Nvr Installation Guide

    NVR Installation Guide 2 NVR Installation Guide The NVR must be put in a dry and well-ventilated environment with good dustproof, anti-interference and lightning-protection capabilities. Working Environment Place on a horizontal table or mounted on a rack. Placement Working voltage: 100V – 240V, frequency: 50 Hz – 60 Hz. Power Alarm input: switch Alarm output: switch, normally open...

  • Page 19: Necessary Device Components

    NVR Installation Guide Necessary Device Components A user who buys a NVR device will have the following devices and components: Icon Name Remarks Network Video Recorder Conducts all operations related to the surveillance Remote control system (applicable to NVR2820 and NVR2860) Used for connecting audio/video unit Audio/video cable Used for connecting NVR and network...
  • Page 20 NVR Installation Guide The above devices are not enough for building a complete surveillance system. Based on the actual needs, you have to prepare some additional devices, such as: Icon Name Remarks Monitor, display or TV wall, at least one must be Video display device selected Video acquisition and...

  • Page 21: Installing Built-In Hard Disk

    Figure 2-1 Installing Hard disk for NVR2820L Notice: If use the Seagate Barracuda LPTM 2TB hard disk, before the above steps, you need use the Jumper block, the details as following. Figure 2-2 Installing Jumper block in Hard disk for NVR2820L...
  • Page 22 NVR Installation Guide NVR2820 supports one built-in IDE hard disk. Figure 2-3 Installing Hard disk for NVR2820...
  • Page 23 NVR Installation Guide The NVR2820E supports four or eight pieces of built-in SATA hard disks. The installing method of supported four disks, Figure 2-4 Installing Hard disk for NVR2820E...
  • Page 24 NVR Installation Guide The installing method of NVR2820E which support eight disks is the same as above steps, but the hard disk stand has two layer, you need tighten the 3 screws which in the bottom stand, the detail as the following figure.

  • Page 25: Configuration Wizard

    According to the section “1.4 NVR Panels“, after all the cables connection. NVR2820L will automatically start and it will automatically partition and format the built-in hard disk at first. As NVR2820L has no local display output, its initial configuration need use IPCSearch which in the same LAN to configure.

  • Page 26: Other Nvr

    1: The system requirement of PC which run NVR Station, please refer to Section “7 NVR Station”. 2: All the operation of NVR2820L need in the NVR Station, the function of NVR Station please refer to NVR Station Help, in this document we’ll not repeat it.

  • Page 27: Configuring Video Source Device

    NVR Installation Guide For initial configuration, it is recommended that network configuration be made first, and other settings may be conducted after the buildup of the surveillance system. Configuration information: Parameter Description If a number of NVR are used, please set the NVR No. from 0 to 8.When it is 8, the NVR No.

  • Page 28: Connecting Cables

    NVR Installation Guide Connecting Cables Figure 2-7 Connect NVR cables Figure 2-8 Connect KDM201S cables...
  • Page 29 NVR Installation Guide Network Connection Connect the NVR, camera and video unit to the network. The illustrations show the method to make a network cable: Connect Display/Monitor Please select a display or monitor according to the network configurations to facilitate live video and NVR parameter configuration.
  • Page 30 NVR Installation Guide Alarm Device Connection The green terminal on the rear panel of the NVR can be used to connect alarm input/output device and surveillance keyboard, which is same as the ALARM IN/OUT interfaces on the rear encoder of KDM201S.

  • Page 31: Verification

    NVR Installation Guide Connect a keyboard to multiple NVR: ♦ Connect the keyboard to a NVR; ♦ Connect all the NVR by RS485 connector, RS485A to RS485A, RS485B to RS485B. ♦ See the NVR User Manual for surveillance keyboard operating details. Verification Switch on the power supply and turn on the device to enter the Configuration Wizard interface (refer to NVR Quick Reference for details).

  • Page 32: Network Configuration

    Network Configuration 3 Network Configuration The NVR supports deployment of diversified networks: LAN: all devices are deployed over the same LAN. ♦ WAN: all devices are deployed over the WAN (fixed IP or dial-up network), supporting DDNS. ♦ Hybrid network: the NVR is deployed over an Intranet, while the NVR Station accesses via an Extranet, supporting NAT traversal and Socks5 proxy.

  • Page 33: Dial-Up Network Settings

    Network Configuration networking After enabled, lost video packets will be retransmitted. Packet Lost Resend NVR worked as a DHCP server, and dispatch IP address to the video unit Enable DHCP which use DHCP Dial-up Network Settings Parameter Description Enable dial-up function; Enable PPPoE Internet access username provided by the ISP;...

  • Page 34: Nat Traversal Settings

    Network Configuration Parameter Description The NVR worked as a DHCP server, and assign IP information to video units, such as IPC, IPA, and decoder. See later calculating method for details. If DHCP NVR2860 offer DHCP, the ETH1 connector must be used to connect to the network.

  • Page 35: Proxy Settings

    Network Configuration NAT with NVR The port for NVR to receiver audio NAT mapping port The port for NVR to receiver video 2 NAT mapping port Click advance to set the camera NAT parameters. For NAT settings, refer to the NAT setting section in the appendix. Proxy Settings The NVR Station can access the NVR via Socks5 proxy.

  • Page 36: Video Device Management

    Video device Management 4 Video device Management Video device means video encoder, IP Camera and decoder. The NVR supports flexible networking, as well as auto and manual networking. Notice: After networking, when you log on to the NVR Station to browse videos in local login mode, please make sure that the smooth network connection between the visitor and the Encoder, for example, the configuration of such information as route or gateway.

  • Page 37: Video Device Management

    Video device Management See section “Appendix 1” for network access of devices other than multicast devices. Video device management Enter into the device management interface from the main menu, and select the device: Delete device ♦ Change device ♦ Change name ♦...

  • Page 38: Parameter Settings

    Video device Management Click group management, name or modify the group on the popup interface. Click the video unit of encoder or decoder, and click the button add group, then add the unit to the group. Parameter Settings On the Settings interface, set the general information, video encoding, motion detection, OSD parameters, COM parameters, network parameters and dial-up settings.

  • Page 39: Minor Stream

    Video device Management Parameter Description Frame rate of collection acquisition, it can be a higher value if the network Collection frame rate conditions are much better; otherwise, please set a lower value. Video rate after compression, depending up network bandwidth Code rate Frame interval for sending complete information frames, if there is high requirement for video quality and the network conditions are good, reduce the...

  • Page 40: Osd

    Video device Management support of the DVS. The image is divided into 16*12 parts, maximum 24 parts shaded are support at a time. How to Shade image: Select Image Shade tab, and select Enable Image Shade, and click in the image area below, then draw one or more rectangular in the area, then click save to take effect.

  • Page 41: Network Parameters

    Video device Management Parameter Description Baud rate of data transmission over the COM port Bits rate(bps) 4.4.10 Network Parameters Parameter Description Add, Edit or Delete network address information; IP address & Subnet mask Gateway of the network over which the device is located Gateway NVR address registered by the device Register Address...

  • Page 42: Nvr Register To Surveillance Platform

    Video device Management NVR register to Surveillance Platform NVR2820 and NVR2820E can be registered to surveillance platform: 1） Register NVR to surveillance platform(refer to the surveillance platform for details） ； 2） Records the PUID when register, dispatch by system automatically； 3）...

  • Page 43: Storage And Backup

    Storage and Backup 5 Storage and Backup Storage and backup device supported: Built in hard disk ♦ External USB disk array ♦ External USB DVD rewriter ♦ Refer to Section 2.4 for the installation of built in hard disk. ♦ Disk management functions: ♦...

  • Page 44: Backup And Write In Dvd

    Storage and Backup safe method for removing the USB hard disk is to download the disk first and then remove it after it is downloaded successfully. To change disk connection, for example, take out the built-in hard disk and use it as an external disk, format the disk again, or vice versa.

  • Page 45: Alarm Device Management

    Alarm Device Management 6 Alarm Device Management Alarm input device involves two types: Normal open and Normal close. Normal open: it is turned off in normal condition without alarm input, and will not trigger alarm. If an alarm occurs, it is turned on to trigger alarm; Normal close: it is turned on in normal condition without alarm input, and will not trigger alarm.

  • Page 46: Nvr Station

    NVR Station 7 NVR Station The NVR management system (NVR Station) provides user-friendly operation interfaces for remote access, featuring simple and easy to use. The NVR Station provides two modes: software setup and WEB access. The NVR Station supports a maximum of 128 NVR, supporting the following functions: Video surveillance ♦...

  • Page 47: Login

    NVR Station Login Double click the icon on the desk，and enter the username and passport in the popup interface。 The default username and password both are admin。...

  • Page 48: Nvr Management

    NVR Management 8 NVR Management Recovering Factory Settings To recover factory settings means the recovery of default settings. Normally, this operation is not recommended. Select Main Menu Settings System Reset. It will require entering your username and password again. Recover factory setting parameters: All: All parameters will be recovered to their default settings.

  • Page 49: Update Via Com Port

    NVR Management 5） Select the update file, and click Update to start update. 6） The system restarts after update. Notice: FAT16 file system of U disk is not supported in the windows system to update NVR. 8.3.2 Update via COM Port Operating Procedure: 1）...
  • Page 50 NVR Management 1） Log on the NVR Station 2） Select NVR from the surveillance list and select Version Update from the shortcut menu. 3） Select the update package to update the NVR software version. 4） Refer to related update section in Online Help of NVR Station for details.

  • Page 51: Appendix

    Appendix Appendix 1 Registration Parameters Settings Other Than Multicast For the Video device other than the multicast of the NVR surveillance system to register NVR, network configuration should be made first. The connection method is as follows: Install the software IPCCtrl on your PC (refer to delivery-attached CD for the software). Run IPCCtrl, and search device automatically.

  • Page 52: Nat Settings

    NAT Settings 2 NAT Settings The NVR, Camera and NVR Station are located in WAN/LAN. When they are in the same LAN, NAT setting is unnecessary. If any of them is in different network and needs mutual access, NAT access setting is needed.

  • Page 53: Nat Settings Of The Lan

    NAT Settings 2.2.1 NAT Settings of the LAN Set the NAT of the LAN at the NVR end, map the signaling port (TCP) 1730 of the NAT into port 1730 of the NVR, and map the packet port (UDP) 11988 of the NAT into port 11988 of the NVR. 2.2.2 NVR Settings Set Local Port Receiving NVR Station Detection Packets, Nat mapping port and DVS mapping port.

  • Page 54: Nvr And Station Located In Different Nat

    NAT Settings NVR and Station Located in Different NAT When the NVR and Station are located in different LANs, with the configuration of NAT. the setting method is the same as that mentioned in Section 3.2 in the Appendix, so no further description will be given here.

  • Page 55: Camera And Nvr Located In Different Nat

    NAT Settings Camera and NVR Located in Different NAT 2.4.1 NAT Settings When the Camera or encoder (DVS) and NVR are located in different NAT: The signaling port (TCP) 5510 of the Camera and NVR must be mapped into port 5510 of the NVR Set the three packet ports for the NVR to receive videos, audios and video 2 of the Camera mapped respectively (The values mentioned of the NVR can be seen from NVR or Station.

  • Page 56: Settings Of Proxy Server

    Settings of Proxy Server 3 Settings of Proxy Server The NVR supports networking in complicated environment, as well as the connection of the NVR management system client with NVR via proxy. When the proxy function is enabled, it agents the server. Make sure that the devices using proxy are not filtered by the proxy server and the service is available.
  • Page 57 Settings of Proxy Server Appendix Figure 3-2 4） Fill in User/Group Name. Select the Password check box and fill in the password. 5） Set the Maximum Connection to -1, that is, no limitation on connections; 6） Set Bandwidth to -1, that is, no bandwidth limitation; 7）...
  • Page 58 Settings of Proxy Server If the device with an IP of 172.16.131.12 wants to use the proxy, the Permitted Sites must include the network section or the Forbidden Sites should not include the network section.

  • Page 59: Firewall

    Firewall 4 Firewall If the NVR is located inside the firewall, while the NVR Station and video source devices (such as encoder adapter) are outside the firewall, enable the following firewall ports: TCP: 5510, 1730, 21, 15510 ♦ UDP: 5510, 12000-12095, 11992, 11988，11520, 51000-51203 ♦...

  • Page 60: Technical Specifications

    A maximum of 32 external USB hard disks or two disk External USB hard arrays can be expanded, recommend JL-SU43 series、 disk HS410S、Kedacom VS300/VS400 disk array. Update NVR through U disk, COM port or the NVR Software update Station Version update...

  • Page 61: Nvr2860

    320G, 500G, 750G, 1T, 1.5T disk disks and 2T Hard disk A maximum of 32 external USB hard disks or two disk arrays can be expanded. JL-SU43 series or HS410S External USB hard disk disk, Kedacom VS400 disk arrays are recommended...

  • Page 62: Nvr2820E

    Technical Specifications Update NVR through U disk, COM port or the NVR Software update Station Version update Update the video unit through the NVR Station Video unit Supporting a maximum of 4 areas Motion detection A maximum of four periods every day Event alarm Alarm schedule Supported...
  • Page 63 A maximum of 32 external USB hard disks or two disk arrays can be expanded. JL-SU43 series or HS410S External USB hard disk disk and Kedacom VS400 disk arrays are recommended Update NVR through U disk, COM port or the NVR...

  • Page 64: Nvr2820

    Technical Specifications NVR2820 Video PAL/NTSC Video system MPEG-4, H.264 Video compression Main stream:D1, CIF Resolution Minor stream: QCIF, CIF Audio/video 1/16~30 fps (adjustable) Frame rate 64kbps - 2Mbps (adjustable) Code rate G.711, ADPCM Audio compression <300 ms Transport delay Maximum alarm pre-recording time: 30 s; Pre-Recording storage with built-in hard disk or external USB hard disk Recording...

  • Page 65: Kdm201S/ Kdm201-D01H

    Technical Specifications protocol and VSIP 100VAC - 240VAC Operating voltage Place on a table or mount on a bracket Horizontally Placement Conventional 0ºC - 50 ºC Operating temperature parameters 10% - 85 % (non-condensing) Relative Humidity -60～5000m Operating Altitude KDM201S/ KDM201-D01H Video PAL/NTSC KDM201-D01H supported 720P( Max )
  • Page 66 A maximum of 32 external USB hard disks or two disk arrays can be expanded. JL-SU43 series ,HS410S External USB hard disk disk or Kedacom VS400 disk arrays are recommended Update NVR through U disk, COM port or the NVR Software Update...

  • Page 67: Glossary

    Glossary Glossary Term Explanations Network Video Recorder Moving Pictures Experts Group MPEG-4 Network Address Translation Dynamic Host Configuration Protocol DHCP Simple Network Time Protocol SNTP Dynamic Domain Name Server DDNS Real-time Transport Protocol Real-time Control Protocol RTCP Common Intermediate Format, with a resolution of 352 * 288 Point to Point Protocol over Ethernet PPPoE Phase Alternating Line, a TV system.

This manual is also suitable for:

Nvr2820-9Nvr2820-16Nvr2820e-16Nvr2820e-9dNvr2820e-16dNvr2860-32d ... Show all

Table of Contents