Advertisement
1. Operating Instructions
DIPSWITCH CHART
#1
#2
#3
#4
#5
X
X
X
X
X
1
X
X
X
X
1
x
x
x
1
Sound control
Animation
1.1 Single user mode:
1.1.1 Use dip switch to set operating mode(See the table below）. Set
the operating mode according to clients' requirement: SOUND
ACTIVE or AUTO MODE.
1.1.2 Connect the power supply, and the lamp start to project laser light.
1.1.3 When in SOUND ACTIVE mode，adjust sound control sensitivity,
and adjust the sound control sensitivity knob according to the
surrounding's sound strength. In the front panel when the blue
indicator flashes to indicate the sound activation, the system is in
sound active program; when in Auto mode, the system is in
Auto-working program.
#6
#7
#8
#9
#10
X
X
X
X
x
X
X
X
x
x
x
x
x
x
x
FUNCTION
SOUND ACTIVE
AUTO MODE
Animatiom
Auto working
Advertisement
