Advertisement
on. Please refer to the user manual of lasers with SD card and CD.
DMX512 Controller connecting lasers:
IN
OUT
x
N..........
DMX Console(Sending end)
laser1(Receiving end）
Laser 2
Laser 3 ....................
For example, If the laser has 11 channels, the address is set as: 000000001
000001100
000010111
............
1.Connection Method：
DMX Console---------Laser
Every machine is connected in series like serial installation.
Many people thought signal is serial but DMX signal is collateral.
All the receiving ends are connected in parallel in DMX control. If
address code isn't differentiated, we can't differentiate sending
ends. As long as the sending ends are differentiated, it can form
different and regular effects. Therefore, the address switch in our
laser can set address, and then DMX console can tell the
difference. How to set the address can be shown at 3. (Attention:
Advertisement
