Product Identification; Product Features; Remote Control Accessories; Local Codes - Comfort Glow CGCF26NRA Owner's Operation And Installation Manual

Vent-free natural gas
Table of Contents

Advertisement

PRODUCT
IDENTIFICATION
Fireplace
Cabinet
Ignitor Button
Selector Switch (Optional)
Figure 1 - Vent-Free Natural Gas Compact Fireplace

LOCAL CODES

Install and use fireplace with care. Follow all
local codes. In the absence of local codes, use
the latest edition of The National Fuel Gas
Code ANS Z223.1, also known as NFPA 54*.
*Available from:
American National Standards Institute, Inc.
1430 Broadway
New York, NY 10018
National Fire Protection Association, Inc.
Batterymarch Park
Quincy, MA 02269
105617
Screen
Logs
Flame Adjustment Knob
Control Knob
UNPACKING
1. Remove log box and fireplace from
carton. The hood is not attached.
2. Remove all protective packaging ap-
plied to fireplace for shipment.
3. Make sure your fireplace includes one
hardware packet and one remote con-
trol packet which includes batteries.
4. Check fireplace for any shipping damage.
If fireplace is damaged, promptly inform
dealer where you bought fireplace.
OWNER'S MANUAL
PRODUCT
FEATURES
SAFETY PILOT
This fireplace has a pilot with an Oxygen
Depletion Sensor Shutoff System (ODS).
The ODS/pilot is a required feature for vent-
free room fireplaces. The ODS/pilot shuts off
the fireplace if there is not enough fresh air.
PIEZO IGNITION SYSTEM
This fireplace has a piezo ignitor. This sys-
tem requires no matches, batteries, or other
sources to light fireplace.
REMOTE CONTROL
ACCESSORIES
Remote
There are four optional remote controls that
(Optional)
can be purchased separately for this log
heater:
• hand-held ON/OFF remote
• hand-held thermostat remote
See Accessories, page 24.
3

Advertisement

Table of Contents
loading

Table of Contents