Table of Contents
Advertisement
2-2-3 Housing Ass'y Removal
1) Remove Belt 1.
2) Push the Hook 2 in the direction arrow "A" and lift up Pulley Gear 3.
3) Push the Slider Housing 5 in the direction arrow "B" and lift up the Gear Tray 4.
4) Lift up the Slider Housing 5.
5) Remove the soldering 6 of 2 points (Red, Black).
6) Remove 2 Screws 7 and lift down the Motor Load Assy 8.
7) Push the 2 Hooks 9 bottom side in the direction arrow "C" and lift up the Housing PCB 0.
8) Push the Hooks qa and remove Deck PCB qs.
4 GEAR TRAY
3 PULLEY GEAR
1 BELT
8 MOTOR LOAD ASSY
6 SOLDERING
7 2 SCREWS
2 HOOK
"A"
"C"
"C"
9 3 HOOKS
<Bottom Side>
Fig. 2-9 Housing Ass'y Removal
"B"
"C"
2-5
5 SLIDER HOUSING
qa HOOK
0 HOUSING PCB
Advertisement
Table of Contents
