Advertisement
AAA -
Rear Panels
AAA-30-8
AAA-60-10
T
AAA-120-15
T
AAA-300-210
T
FRONT PANEL FACILITIES:
Input
A single input jack socket is provided for your instrument. This is a high im-
pedance input designed to perfectly match the impedance of the pick-ups on a
passive bass. It also has sufficient headroom available to allow active basses
to be used. Use the input gain control to adjust for the sensitivity of your in-
strument (AAA-30 ONLY). Two sockets are provided on other models for both
LOW and HIGH impedance instruments separately, simply use the input knob
to set the desired input signal to suit your instrument.
APPTEK
The AppTek socket provided allows a person to connect their device using an
amp simulator on an iPhone or iPad. We have developed with Agile Partners
Amp-Kit so you are able to use an ABM modeled pre amp and ABM-810 cab
through your practice amp and also expand this with an array of available
pedals. The App/FX Mix roatary contaol on the AAA-120 & AAA-300 models
allows you to blend the level of FX or AppTek being fed to the amp, working as
a wet signal mix control.
E.Q.
This passive EQ has bass, middle and treble tone controls (AAA-30 & AAA-60
ONLY). The AAA-120 & AAA-300 utilize a wider range of EQ Bass, Lo-Mid,
Hi-Mid, Treble along with a variable Mid Sweep for re-fining the mid range of
your tone. There are also Vintage/Modern Lows & Highs switches on the front
panel this alters the frequency response of the EQ for further tone-shaping
capabilities.
DRIVE
This adds tube-emulated overdrive as a tube amp would when adding gain,
from slight grit to full on overdrive. This is foot-switchable on the AAA-120 and
AAA-300 models via a signal latching foot-switch sold separately.
Ashdown Amplifiers reserve the right to change specifications without notice. E & O E. All contents © Ashdown 2016.
Advertisement
