Ashdown Engineering will, at their discretion, replace by qualified personnel when: The CE mark which is attached to or repair any product or part thereof, which is found by Ashdown Engineering to be defective. a. The power supply cord or the these products means it conforms plug has been damaged;...
Page 3
USER MANUAL USER MANUAL AFTER 8 / PERFECT 10 AFTER 8 / PERFECT 10 FRONT PANEL HEADPHONES LINE IN MASTER TREBLE MIDDLE BASS GAIN INPUT HEAdHOPNEs A headphone jack socket is provided to allow stereo headphones to be plugged into the amplifier for silent practice. This cuts out the main speaker when a jack plug is inserted.
USER MANUAL FIVE 15 / MINI STACK 100 515 FRONT PANEL INPUT LINE IN HEADPHONES INPuTs BASS MIDDLE TREBLE 180Hz 340Hz 1.3KHz 2.6KHz High Input Impedance - 3.9M ohms Input range 150mv to 20v p - p Low Input Impedance - 10k ohms Input range 300mv to 40v p - p Effects Return Impedance - 22k ohms...
Page 5
USER MANUAL USER MANUAL EB LITE 220 EB LITE 220 dIREcT INjEcT ( d.I. ) A balanced D.I. Is provided on the front panel XLR socket. This provides a post E.Q. Post effects signal. INPUT D.I. OUTPUT BASS MIDDLE TREBLE INPUT LEVEL 340Hz 1.6 KHz...
Page 6
USER MANUAL USER MANUAL MAG 300 / 600 MAG 300 / 600 sub HARMONIcs This section produces sub harmonics an octave below the notes being played. The level of these sub harmonics relative to the straight bass sound INPUT D.I. OUTPUT BASS MIDDLE...
Page 7
MANUFACTURED IN THE UK BY:- 1000W RMS 2000W PEAK @ 4 OHMS ASHDOWN ENGINEERING sub HARMONIcs This section produces Sub Harmonics an octave below the notes being played. The level of these Sub Harmonics relative to the straight bass sound can be adjusted using the LEVEL control.