Changing The Start Notice; System Settings; Gps Settings; Changing The Accent Color - Garmin Edge Explore 1000 Owner's Manual

Hide thumbs Also See for Edge Explore 1000:
Table of Contents

Advertisement

3
Select a display speed.

Changing the Start Notice

This feature automatically detects when your device has
acquired satellites and is moving. It is a reminder to start the
timer so you can record your ride data.
1
Select
> Activity Settings.
2
Select Start Notice.
3
Select an option:
• Select Once.
• Select Repeat > Repeat Delay to change the amount of
time to delay the reminder.

System Settings

Select
> System.

• GPS Settings

(GPS Settings, page
• Color Settings
(Changing the Accent Color, page

• Display Settings

(Display Settings, page
• Incident Detection Settings
and Off, page
5)
• Data Recording Settings
Location, page
7)
• Unit Settings
(Changing the Units of Measure, page
• Tone Settings
(Setting the Device Tones, page
• Language Settings

(Changing the Device Language,

page
12)
GPS Settings
Changing the Satellite Setting
For increased performance in challenging environments and
faster GPS position location, you can enable GPS and
GLONASS. Using GPS and GLONASS reduces battery life
more quickly than using only GPS.
1
Select
> System > GPS > GPS Mode.
2
Select an option.
Setting Your Elevation
If you have accurate elevation data for your present location,
you can manually calibrate the altimeter on your device.
1
From the home screen, select
Elevation.
2
Enter the elevation, and select
Viewing Satellites
The satellite page shows your current GPS satellite information.
For more information about GPS, go to
/aboutGPS.
From the home screen, select
Satellites.
GPS accuracy appears at the bottom of the page. The green
bars represent the strength of each satellite signal received (the
number of the satellite appears below each bar).

Changing the Accent Color

You can change the accent color on the device.
1
Select
> System > Color.
2
Select an accent color.
Display Settings
Select
> System > Display.
Auto Brightness: Automatically adjusts the backlight brightness
based on the ambient light.
Backlight Timeout: Sets the length of time before the backlight
turns off.
12
12)
12)
12)
(Turning Incident Detection On
(Changing the Data Storage
12)
> System > GPS > Set
.
www.garmin.com
> System > GPS > View
Color Mode: Sets the device to display day or night colors. You
can select Auto to allow the device to automatically set day or
night colors based on the time of day.
Orientation: Sets the device to display in portrait or landscape
mode.
Screen Capture: Allows you to save the image on the device
screen.

Changing the Units of Measure

You can customize units of measure for distance and speed,
elevation, temperature, weight, position format, and time format.
1
Select
> System > Units.
2
Select a measurement type.
3
Select a unit of measure for the setting.

Setting the Device Tones

From the home screen, select
Changing the Device Language
From the home screen, select

Changing the Configuration Settings

You can modify all of the settings you configured in the initial
setup.
1
Select
> System > Device Reset > Initial Setup.
12)
2
Follow the on-screen instructions.

Time Zones

Each time you turn on the device and acquire satellites, the
device automatically detects your time zone and the current time
of day.

Specifications

Edge Specifications

Battery type
Battery life
Operating temperature
range
Charging temperature
range
Radio frequency/
protocol
Water rating
*The device withstands incidental exposure to water of up to 1 m
for up to 30 min. For more information, go to
/waterrating.

Remote Specifications

Battery type
Battery life
Operating temperature
range
Radio frequency/protocol 2.4 GHz ANT+ wireless communications
Water rating
*The device withstands pressure equivalent to a depth of 50 m.
For more information, go to www.garmin.com/waterrating.
> System > Tones.
> System > Language.

Device Information

Rechargeable, built-in lithium-ion battery
15 hours, typical usage
From -20º to 60ºC (from -4º to 140ºF)
From 0º to 40ºC (from 32º to 104ºF)
2.4 GHz ANT+ wireless communications
protocol
Bluetooth Smart wireless technology
Wi‑Fi wireless technology
IEC 60529 IPX7*
User-replaceable CR2032 (3 V)
Up to 1.5 yr. (1 hr./day)
From -10° to 50°C (from 14° to 122°F)
protocol
5 ATM*
www.garmin.com
Device Information

Advertisement

Table of Contents
loading

Table of Contents