Page 1
Edge Explore 1000 ® Owner’s Manual September 2015 Printed in Taiwan 190-01944-00_0B...
Page 2
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements.
Viewing Data Totals ..............6 Support and Updates ..............13 Deleting Data Totals .............. 6 Getting More Information ............13 Sending Your Ride to Garmin Connect ........6 Getting the Owner's Manual ............. 13 Garmin Connect ..............6 Viewing Device Information ............13 Bluetooth®...
(0.8 N-m). You should check the tightness of the screw Go for a ride (Going for a Ride, page periodically. Upload your ride to Garmin Connect (Sending Your Ride to ™ Align the tabs on the back of the Edge device with the bike...
• Select to search near a location. • Select to search by name. • Select to delete an item. Viewing the Connections Screen The connections screen displays the status of the GPS, ANT+ ® sensors, and wireless connections. From the home screen, swipe down from the top of the screen.
It may take 30–60 seconds to locate satellite signals. Courses You can send a course from your Garmin Connect account to your device. After it is saved to your device, you can navigate the course on your device. You can also create and save a custom course directly on your device.
Select Courses > Round-Trip Course. Select Courses > Saved Courses. Select Distance, and enter the total distance for the course. Select a course. Select Start Location. Select Settings. Select an option: Select Always Display to make the course appear on the map.
Setting the Search Location The Garmin Connect Mobile app does not contact emergency services on your behalf. By default, the device searches for points of interest and other locations near your current location. You can set the device to When an incident is detected by your Edge device with GPS search near a different location.
The Edge device has Bluetooth connected features for your From the home screen, select History > Totals. compatible smartphone or fitness device. Some features require Deleting Data Totals you to install Garmin Connect mobile on your smartphone. Go to Select History > Totals. www.garmin.com/intosports/apps for more information.
Activity uploads to Garmin Connect: Automatically sends Turn on both Edge devices, and bring them within range your activity to Garmin Connect as soon as you finish (3 m) of each other. recording the activity. From the device that contains the files, select >...
Status LED. Pairing is the connecting of ANT+ wireless sensors, for example, connecting a heart rate monitor with your Garmin device. Status LED Bring the device within 3 m (10 ft.) of the sensor. LED Activity Status NOTE: Stay 10 m (33 ft.) away from other riders' ANT+...
Select the remote, and select Add. After the remote is paired, it connects to your device whenever the device is in range and turned on. Customizing the Action Key From the Edge home screen, select > Sensors > Edge Remote > Sensor Details. Install the new battery into the back plate with the positive Select Single Press or Press and Hold.
• Select Auto Features > Auto Scroll to customize the your personal abilities. You can manually adjust your zones on display of the training data pages when the timer is the device or using Garmin Connect. If you know your functional running (Using Auto Scroll, page 11).
• Select Lap Press Only to trigger the lap counter each Select time you select and each time you pass any of those Go to http://buy.garmin.com, or contact your Garmin dealer. locations again. • Select Start and Lap to trigger the lap counter at the GPS Route Settings...
Auto Brightness: Automatically adjusts the backlight brightness *The device withstands pressure equivalent to a depth of 50 m. based on the ambient light. For more information, go to www.garmin.com/waterrating. Backlight Timeout: Sets the length of time before the backlight turns off.
You can turn off the device screen and all other features while and the Garmin Express application. charging. ◦ Sync your device to the Garmin Connect Mobile app using Connect your device to an external power source. your Bluetooth enabled smartphone.
Appendix Location at Dest.: The last point on the route or course. Location at Next: The next point on the route or course. Data Fields Odometer: A running tally of the distance traveled for all trips. This total does not clear when resetting the trip data. Some data fields require ANT+ accessories to display data.
“Software”) in binary executable form in the normal operation of the product. Title, ownership rights, and intellectual property rights in and to the Software remain in Garmin and/or its third- party providers. You acknowledge that the Software is the property of Garmin...