Advertisement
SB350. The system will appear as "Cinema SB350" in the list of Bluetooth
available devices. When the JBL Cinema SB350's Bluetooth button LeD
illuminates constantly, it is paired with your device and you can stream
audio via Bluetooth from the device to the JBL Cinema SB350.
To listen to audio from the Bluetooth device, press the Bluetooth source button
on the JBL Cinema SB350 or remote to activate the source. if the JBL Cinema
SB350 is in Standby mode, you can automatically wake up the system by
starting to stream an audio Bluetooth signal to the JBL Cinema SB350 as long
as your device has already been paired with the JBL Cinema SB350.
To disconnect the Bluetooth device, press and hold the JBL Cinema SB350's
Bluetooth button until the LeD begins flashing.
NoTE:
• You can manually switch sources to the paired Bluetooth device by
pressing the JBL Cinema SB350's Bluetooth button.
• If you switch the JBL CINEMA SB350 to a different source while a paired
Bluetooth device is streaming to the system, the JBL Cinema SB350 will
send a STOP command and the Bluetooth device will stop streaming.
• While pairing the Bluetooth device for the first time, it may reset the volume
level to maximum.
Adjusting the System Volume
For the best sound, we recommend turning your TV's built-in speakers off.
Consult your TV's owner's manual to find out how to do this. if there is no way
to turn your TV's speakers off, you can adjust the TV's volume so that your
JBL Cinema SB350 system will always supply most of the sound:
1. Using the volume buttons on your TV, turn its volume all the way down.
2. Use the JBL Cinema SB350's Volume Up/Down buttons to set the sound
to a comfortable listening level. This way, your JBL Cinema SB350 system
should always be louder than your TV speakers.
IMPorTANT: If you play the JBL CINEMA SB350 at
more than 50% of max volume it will automatically reset at
50% of the max volume when it is turned off using either the
power button or the auto turn off function.
Surround Mode Button
Press the soundbar's or remote's Surround mode indicator to switch the
sound between normal stereo and surround sound providing a complete
surround-sound experience for anyone sitting in front of and several feet away
from the soundbar. although it is particularly effective when watching movies,
you can also take advantage of the Surround setting for adding to your music-
listening experience.
Programming JBL CINEMA SB350 to
respond to Your TV remote
you can program the JBL Cinema SB350 to make it respond to your
TV remote's power, mute, volume up and volume down commands.
This programming lets you control power and volume functions of your
JBL Cinema SB350 soundbar with your TV remote. Before beginning
to program the JBL Cinema SB350, have your TV remote in hand.
We recommend sitting down in front of the soundbar.
10
NoTE: Some steps will time out, so read through this
entire process before you begin.
Have the TV remote in hand. When you start programming the remote, be
ready to aim the TV remote to the front of the soundbar from about
300mm–900mm (12–36 inches) away.
TV remote
To program the power, volume down, volume up and mute commands:
1. ensure that the JBL Cinema SB350 is On.
2. On the soundbar, press and hold the top-panel Surround button until the
LeD flashes amber. if the LeD does not flash after three seconds, release
the buttons and try again.
3. Press the soundbar top-panel button you want to program (Power, Volume
Down, Volume Up, Volume Down and Up simultaneously for mute).
4. aim the TV remote at the front of the soundbar and slowly press the
corresponding button on the top-panel button until the Surround button
on the soundbar flashes white for one second. This indicates that the
programming operation has been successful.
5. To exit the learning mode (at any time or when the learning is complete),
press and hold the soundbar Surround button until the amber LeD stops
flashing.
NoTE: If you would like to program a new TV remote
control or you are missing a command, restart the whole
process.
To reset the JBL Cinema SB350 remote settings:
1. Press the top-panel power button to enter Standby mode (amber color
indicator)
2. Press and hold the Surround and Volume (–) buttons simultaneously
Once factory defaults are restored, the JBL Cinema SB350 surround button
will flash white for one second, then the unit will enter into operational mode.
TrouBLESHooTING
if your JBL Cinema SB350 system does not perform the way you think it should, check whether the problem is covered in this section before contacting your
dealer or a JBL representative.
Problems
if the soundbar does not turn On
if the subwoofer does not turn On
if there is no sound coming from both the soundbar and the subwoofer
if there is no sound coming only from the subwoofer
if the soundbar's sound is distorted
if there is sound from the system, even when the soundbar's volume is turned all
the way up
if the bass output is not loud enough
The volume is reset when i turn on the soundbar
my TV is On and my SB350 is in Standby. When i switch off my television, it turns
my SB350 On
Solutions
• Check if the soundbar power supply's AC cord is plugged into a working AC
outlet and that the power supply is plugged into the soundbar.
• Check if the subwoofer's power cord is plugged into a working AC outlet.
• Press the Power switch of the subwoofer.
• Check if the subwoofer's AC fuse has blown. See Subwoofer Rear Panel
Controls.
• Check if soundbar is ON (the Power Indicator should be white).
• Check if the cable connecting the TV or other source component to soundbar
is properly connected at both ends.
• Check if the soundbar's Source Selector is set to the correct source and that
source is playing an audio signal.
• Check if the system is not muted. If the system is muted, press the volume
buttons to un-mute the system.
• Check if the soundbar's volume is not turned all the way down (the lowest
setting of the Volume Down button will mute the system).
• Check if the Subwoofer Volume Control is not turned all the way down using
the remote control.
• Check if the wireless connection is still active (Blue LED constant in the back
of the subwoofer). if the LeD is flashing blue, then restart the pairing process.
• Move the subwoofer closer to the soundbar. The maximum wireless operation
distance is 50 feet (15.3 m).
• Check the source component to see if the distortion is coming from it, and not
from soundbar.
• If the TV or source component is connected via a variable output, check its
instructions if the output is not turned down too low.
• Turn up the subwoofer's volume using the remote control.
• Move the subwoofer at a corner of the room.
• Move the subwoofer closer to the seating location.
• This is actually an inbuilt feature of the soundbar. If the soundbar is playing
at more than 50 percent of maximum volume and the power is turned off, the
volume of the soundbar is automatically reset to 50 percent of the maximum
volume when the system is turned On.
• This is actually related to some issue on some television having wrong Hot
Plug Detection (HPD) protocol. you can activate/deactivate HPD protocol by
pressing the Surround and Volume buttons simultaneously.
www.jbl.com
11
Hide quick links:
Advertisement
