Keeping Things Running Smoothly; Recommended Service Schedule - ORD RoVa3D User Manual

User Manual

4. Keeping things running smoothly

The recommended service schedule is designed to keep your RoVa3D printing at its optimum performance,
and is based on a usage of 50 hours per week.
Each service level includes all the lower levels (i.e. when a Level 3 Service is performed, also perform a Level 1
and Level 2 Service).

4.1. Recommended Service Schedule

Level 1
Multipoint inspection
Clean the nozzles
Clean the filament feed gear teeth
Service the filament feed tube ends
Oil Bearings
Oil smooth shafts
Oil Leadscrews
Adjust belt tension
Update the firmware
Level 2
Refresh bed printing surface
Change nozzles
Replace Belts
Clean fans
Service the smooth shafts
Level 3
Replace Ball bearings
Replace linear bearings
Replace filament feed tube
Replace liquid coolant
Level 4
Replace hotend heater cartridge
Replace print bed heating element
Replace the smooth shaft
orddistribution.com Copyright 2015 ORD Solutions (Dist.) Inc. Page 73