Additional Rova3D Functionality; Turn Led Lights On/Off; Avoid Crossing Perimeters - ORD RoVa3D User Manual

User Manual

3.2. Additional RoVa3D Functionality

3.2.1. Turn LED lights on/off

The bed lighting LEDs can be turned off using the LED ON or LED OFF buttons in Pronterface.
They can also be turned on and off using g-code:
Light on is M101 S1
Light off is M101 S0

3.2.2. Avoid Crossing perimeters

Enabling this option will reduce strings and oozing but dramatically increases the time required to slice the
model.
orddistribution.com Copyright 2015 ORD Solutions (Dist.) Inc. Page 60