ORD RoVa3D User Manual page 57

User Manual
Once you've completed the Cut, your model now consists of two parts. You need to export each of these parts
as separate STL files. Select one of the parts, and use the command:
Part --> Export Part --> as STL (ASCII)
Select the second part and export it the same way. You can split the model into any number of pieces, and
then multi-select several parts to have them exported as a single STL file for printing purposes.
Once you have your STL files, follow the instructions in the 'Creating AMF Files' section below to combine your
STL files into a single AMF file.
orddistribution.com Copyright 2015 ORD Solutions (Dist.) Inc. Page 57