Stopping The Engine - Dixon DX152 Operator's Manual

Stopping the Engine

1. Move the throttle to the minimum position (tortoise
symbol).
2. Move the steering controls outward into the
neutral position.
3. Disengage the mower deck by depressing the
blade switch.
4. Raise the mower deck by pressing the foot pedal
forward to the transport position.
5. When the machine is standing still, activate the
parking brake by pulling the lever upward.
If the engine has been worked hard, allow it to idle
at least 60 seconds to attain a normal operating
temperature before stopping. to prevent fouling
the spark plugs, avoid idling the engine for longer
periods.
6. turn the ignition key to the OFF position and
remove key. Always remove key when leaving the
mower to prevent unauthorized use.
IMPORTANT INFORMATION
Leaving the ignition switch in any other
position than OFF will cause the battery to be
discharged.
34
OPeRaTION
Disengage the mower deck and move throttle to minimum
Place controls in neutral position
8050-607
8066-054