Operating Instructions - LY International Electronics PM - 210U Owner's Manual

Operating Instructions

According to the connecting diagram above, connect the circuit of the system properly, plug in the
power supply in case of no mistake in check, and then turn on the power switch on the front panel. After
such startup, this equipment will play the program which is played upon the previous shutdown in the
default state. For example, the raido program is being played upon the previous shutdown, the radio
program will be played automatically upon this startup. In order to play the MP3 program, please press
"MP3/TUNE" button or the "Mode" button on the infrared remote controller (please refer to the
instructions to the infrared remote controller) for conversion.
1. To play MP3 program
1) Begin to play: Convert to the status of MP3 play by the above means (no such operation if it is
playing MP3 program), insert the U disk storing MP3 programs into the USB interface, and the machine
will play automatically. Use the button 12 and 13 on the panel of machine (refer to the instructions to the
front panel) or the infrared remote controller (refer to the instructions to the infrared remote controller) to
select the chapter to be played, and make use the button 4 to pause the play.
2) Selection of repeat mode: MP3 may use the infrared remote controller to select the repeat mode of
the program with the options of repeat one and repeat all. Press the button "RPT" once, and LED will
display "ONE" indicating the repeated playing of the current played chapter; press button "RPT" again,
and LED will display "ALL" indicating the repeated playing of all the chapters on the U disk.
3) Selection of EQ mode: MP3 in this machine has five (5) EQ modes, including Class mode, Jazz
mode, Rock mode, Bass mode and Pop mode. It is allowed to select by use of the button "EQ" on the
infrared remote controller. When pressing the button "EQ", the digital tube will display "Eq0" through
"Eq4". When pressing continuously, five modes such as "Eq0\Eq1\Eq2\Eq3\Eq4" will appear in order,
from which the user can select as required.
4) USB/SD: The MP3 player of this device can play the program from the USB port, and also from
the SD interface, and select the last inserted memorizer to play program in it. For example, if it is playing
the program from the USB port now, and a SD card is inserted into the device, it will play the MP3
program automatically from the SD card.
2. To play radio channel program of tuner
Convert to the "TUNE" play mode by the above means, and then begin to play the radio program.
1）Search channel: Before playing, the user shall first search the radio channel. For this machine,
there are two operating methods for searching channel.
a. Search the radio channel with the MP3 song selection buttons on the infrared remote
controller. Press the song selection button once, the radio frequency will increase or decrease by
7